lkml.org 
[lkml]   [2014]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] ARM: at91: remove phy fixup for sama5d3xek boards
On 10/07/2014 21:59, Boris BREZILLON :
> Hello,
>
> This patch removes a board specific hook for sama5d3xek boards from the
> sama5d3 generic DT board file.
>
> This hook (which register a phy fixup configuring board specific delays
> in the ksz9021 ethernet phy) is now replaced by the appropriate DT
> properties definitions in the sama5d3xcm.dtsi file.
>
> Best Regards,

On the whole series:


Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>


> Changes since v2:
> - define 2 phy nodes to handle Ronetix and Embest HW designs
>
> Changes since v1:
> - fix txc-skew-ps and rxc-skew-ps delays
> - remove phy address info to handle Ronetix and Embest HW designs
>
> Boris BREZILLON (2):
> ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
> boards
> ARM: at91: remove phy fixup for sama5d3xek boards
>
> arch/arm/boot/dts/sama5d3xcm.dtsi | 30 ++++++++++++++++++++++++++++++
> arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
> 2 files changed, 30 insertions(+), 22 deletions(-)
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2014-07-18 23:21    [W:0.071 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site