lkml.org 
[lkml]   [2014]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 00/12] ARM: berlin: USB support
    Date
    This series adds the support for ChipIdea USB2 (ci13xxx) controllers,
    the USB PHYs of the Marvell Berlin SoCs and also adds a reset
    controller for these SoCs.

    The reset controller is used by the PHY driver and shares the
    existing chip controller node with the clocks and one pin controller.

    The Marvell Berlin USB controllers are host only on the BG2Q and are
    compatible with USB ChipIdea. We here add a glue to use the available
    common functions for this kind of controllers, and add a generic USB2
    ChipIdea driver. A PHY driver is also added to control the USB PHY.

    This series applies on top of the generic PHY support in the USB
    framework[1].

    Changes since v2:
    - moved the PHY driver to the generic PHY framework
    - changed the compatible to 'chipidea,usb2'
    - added a property to set the DMA mask in the USB2 CI driver
    - separated dt specific calls in the CI probing function
    - rebased on top of the generic PHY support for CI[1]

    Changes since v1:
    - made the Berlin CI USB driver a generic one
    - added support to custom offset for the reset register
    - added fixed regulators to support supply the VBUS
    - modified the PHY driver to support the one one the BG2CD as
    well
    - documented the reset properties
    - added bindings for the BG2CD
    - cosmetic fixes

    [1] https://lkml.org/lkml/2014/7/15/330

    Antoine Ténart (10):
    reset: add the Berlin reset controller driver
    Documentation: bindings: add reset bindings docs for Marvell Berlin
    SoCs
    ARM: Berlin: select the reset controller
    ARM: dts: berlin: add a required reset property in the chip controller
    node
    phy: add the Berlin USB PHY driver
    Documentation: bindings: add doc for the Berlin USB PHY
    usb: chipidea: add a usb2 driver for ci13xxx
    Documentation: bindings: add doc for the USB2 ChipIdea USB driver
    ARM: dts: berlin: add BG2Q nodes for USB support
    ARM: dts: Berlin: enable USB on the BG2Q DMP

    Sebastian Hesselbarth (2):
    ARM: dts: berlin: add BG2CD nodes for USB support
    ARM: dts: berlin: enable USB on the Google Chromecast

    .../devicetree/bindings/arm/marvell,berlin.txt | 10 +
    .../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++
    .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 23 +++
    arch/arm/boot/dts/berlin2.dtsi | 1 +
    arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 +
    arch/arm/boot/dts/berlin2cd.dtsi | 35 ++++
    arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 +++++
    arch/arm/boot/dts/berlin2q.dtsi | 53 +++++
    arch/arm/mach-berlin/Kconfig | 2 +
    drivers/phy/Kconfig | 7 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-berlin-usb.c | 223 +++++++++++++++++++++
    drivers/reset/Makefile | 1 +
    drivers/reset/reset-berlin.c | 131 ++++++++++++
    drivers/usb/chipidea/Makefile | 1 +
    drivers/usb/chipidea/ci_hdrc_usb2.c | 147 ++++++++++++++
    16 files changed, 708 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
    create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
    create mode 100644 drivers/phy/phy-berlin-usb.c
    create mode 100644 drivers/reset/reset-berlin.c
    create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c

    --
    1.9.1

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2014-07-16 13:41    [W:4.042 / U:0.088 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site