lkml.org 
[lkml]   [2014]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: s3c64xx: Hookup SPI clocks correctly
Hi Charles,

On 18.06.2014 11:52, Charles Keepax wrote:
> In the move to this clock driver the hookups for the SPI clocks were
> dropped, which causes my system Cragganmore (s3c6410 based) to be unable
> to locate any spibus clocks. This patch adds them back in.
>
> When taking the clock from the epll clock (SCLK) the rates on the SPI
> bus are incorrect, this needs further debugging but the hookup here
> should be correct and the problem should be else where.
>
> The USBCLK case has been dropped because this requires the USB PHY to be
> enabled.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> drivers/clk/samsung/clk-s3c64xx.c | 6 ++++--
> 1 files changed, 4 insertions(+), 2 deletions(-)

Thanks for fixing this. Will apply to my fixes branch.

Best regards,
Tomasz


\
 
 \ /
  Last update: 2014-06-25 14:01    [W:0.046 / U:2.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site