lkml.org 
[lkml]   [2014]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/4] crypto: Add Allwinner Security System crypto accelerator
Le 14/06/2014 21:01, Marek Vasut a écrit :
> On Tuesday, June 10, 2014 at 02:43:14 PM, LABBE Corentin wrote:
>> Add support for the Security System included in Allwinner SoC A20.
>> The Security System is a hardware cryptographic accelerator that support
>> AES/MD5/SHA1/DES/3DES/PRNG algorithms.
>>
>> Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
>
> [...]
>
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher-3des.c
>> b/drivers/crypto/sunxi-ss/sunxi-ss-cipher-3des.c new file mode 100644
>> index 0000000..fcdc8a4
>> --- /dev/null
>> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher-3des.c
>> @@ -0,0 +1,118 @@
>> +/*
>> + * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
>> + *
>> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
>> + *
>> + * Support AES cipher with 128,192,256 bits keysize.
>> + * Support MD5 and SHA1 hash algorithms.
>> + * Support DES and 3DES
>> + * Support PRNG
>> + *
>> + * You could find the datasheet at
>> + * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
>> + *
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation version 2 of the License
>
> The license text seems incomplete.
> [...]

I will replace it with a simplier line "Licensed under the GPL-2."

>
>> +static int sunxi_des3_cbc_encrypt(struct ablkcipher_request *areq)
>> +{
>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>> + struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> + if (areq->info == NULL) {
>> + dev_info(ss->dev, "Empty IV\n");
>
> dev_err() here.
>
>> + return -EINVAL;
>> + }
>> +
>> + op->mode |= SS_ENCRYPTION;
>> + op->mode |= SS_OP_3DES;
>> + op->mode |= SS_CBC;
>
> You can just op |= (foo | bar | baz) here .
>
>> + return sunxi_des_poll(areq);
>> +}
>> +
>> +static int sunxi_des3_cbc_decrypt(struct ablkcipher_request *areq)
>> +{
>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>> + struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> + if (areq->info == NULL) {
>> + dev_info(ss->dev, "Empty IV\n");
>
> DTTO.
>
>> + return -EINVAL;
>> + }
>> +
>> + op->mode |= SS_DECRYPTION;
>> + op->mode |= SS_OP_3DES;
>> + op->mode |= SS_CBC;
>
> DTTO.
>
> [...]
>> +static int sunxi_ss_3des_init(void)
>> +{
>> + int err = 0;
>> + if (ss == NULL) {
>> + pr_err("Cannot get Security System structure\n");
>> + return -ENODEV;
>> + }
>> + err = crypto_register_alg(&sunxi_des3_alg);
>> + if (err)
>> + dev_err(ss->dev, "crypto_register_alg error for DES3\n");
>> + else
>> + dev_dbg(ss->dev, "Registred DES3\n");
>> + return err;
>> +}
>> +
>> +static void __exit sunxi_ss_3des_exit(void)
>> +{
>> + crypto_unregister_alg(&sunxi_des3_alg);
>> +}
>> +
>> +module_init(sunxi_ss_3des_init);
>> +module_exit(sunxi_ss_3des_exit);
>
> I really dislike how you have multiple modules accessing the same hardware. That
> just seems broken.

OK I abort my tries to make things optionnal.

>
> [...]
>
>> +static int sunxi_aes_cbc_encrypt(struct ablkcipher_request *areq)
>> +{
>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>> + struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> + if (areq->info == NULL) {
>> + dev_err(ss->dev, "Empty IV\n");
>> + return -EINVAL;
>> + }
>> +
>> + op->mode |= SS_ENCRYPTION;
>> + op->mode |= SS_OP_AES;
>> + op->mode |= SS_CBC;
>
> This looks just like the 3DES implementation. Please make this into a common
> code if possible. I think you'd just need to have some switch statement based on
> the type of cipher to fill op->mode, that's all.

I agree, I will simplify that.

>
>> + return sunxi_aes_poll(areq);
>> +}
>
> [...]
>
>> +static int sunxi_des_cbc_encrypt(struct ablkcipher_request *areq)
>> +{
>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>> + struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> + if (areq->info == NULL) {
>> + dev_info(ss->dev, "Empty IV\n");
>> + return -EINVAL;
>> + }
>> +
>> + op->mode |= SS_ENCRYPTION;
>> + op->mode |= SS_OP_DES;
>> + op->mode |= SS_CBC;
>
> Looks similar to 3DES and AES again.
>
>> + return sunxi_des_poll(areq);
>> +}
>
> [...]
>
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
>> b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c new file mode 100644
>> index 0000000..a27de49
> [...]
>> +int sunxi_cipher_init(struct crypto_tfm *tfm)
>> +{
>> + struct sunxi_req_ctx *op = crypto_tfm_ctx(tfm);
>> + memset(op, 0, sizeof(struct sunxi_req_ctx));
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(sunxi_cipher_init);
>
> This is wrong, you don't want to export this symbol.
>
>> +void sunxi_cipher_exit(struct crypto_tfm *tfm)
>> +{
>> +}
>> +EXPORT_SYMBOL_GPL(sunxi_cipher_exit);
>
> Why do you even need an empty function ?

Ok, I will clean that

>
>> +int sunxi_aes_poll(struct ablkcipher_request *areq)
>> +{
>> + u32 tmp;
>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>> + struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
>> + unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
>> + /* when activating SS, the default FIFO space is 32 */
>> + u32 rx_cnt = 32;
>> + u32 tx_cnt = 0;
>> + u32 v;
>> + int i;
>> + struct scatterlist *in_sg;
>> + struct scatterlist *out_sg;
>> + void *src_addr;
>> + void *dst_addr;
>> + unsigned int ileft = areq->nbytes;
>> + unsigned int oleft = areq->nbytes;
>> + unsigned int sgileft = areq->src->length;
>> + unsigned int sgoleft = areq->dst->length;
>> + unsigned int todo;
>> + u32 *src32;
>> + u32 *dst32;
>> +
>> + tmp = op->mode;
>> + tmp |= SS_ENABLED;
>
> tmp is not a good name for a variable .

renamed to mode

>
>> + in_sg = areq->src;
>> + out_sg = areq->dst;
>> + if (areq->src == NULL || areq->dst == NULL) {
>
> You do a NULL pointer test here, yet you access areq->src->length in sgileft
> above . DTTO for areq->dst->length . That would crash much earlier than here.
>
>> + dev_err(ss->dev, "ERROR: Some SGs are NULL %u\n", areq->nbytes);
>> + return -1;
>> + }
>> + mutex_lock(&ss->lock);
>> + if (areq->info != NULL) {
>> + for (i = 0; i < op->keylen; i += 4) {
>> + v = *(u32 *)(op->key + i);
>
> Consider that op->key would be magically unaligned ... then you'd trigger
> alignment fault here. Make the "op->key" an u32[] and drop those crap casts
> here.

I Agree

>
>> + writel(v, ss->base + SS_KEY0 + i);
>> + }
>> + for (i = 0; i < 4 && i < ivsize / 4; i++) {
>> + v = *(u32 *)(areq->info + i * 4);
>> + writel(v, ss->base + SS_IV0 + i * 4);
>> + }
>> + }
>> + writel(tmp, ss->base + SS_CTL);
>> +
>> + /* If we have only one SG, we can use kmap_atomic */
>> + if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) {
>> + src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
>> + if (src_addr == NULL) {
>> + dev_err(ss->dev, "kmap_atomic error for src SG\n");
>> + writel(0, ss->base + SS_CTL);
>> + mutex_unlock(&ss->lock);
>> + return -1;
>
> -EINVAL ?
>
>> + }
>> + dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
>> + if (dst_addr == NULL) {
>> + dev_err(ss->dev, "kmap_atomic error for dst SG\n");
>> + writel(0, ss->base + SS_CTL);
>> + mutex_unlock(&ss->lock);
>> + kunmap_atomic(src_addr);
>> + return -1;
>
> -EINVAL ?
>
>> + }
>> + src32 = (u32 *)src_addr;
>> + dst32 = (u32 *)dst_addr;
>> + ileft = areq->nbytes / 4;
>> + oleft = areq->nbytes / 4;
>> + do {
>> + if (ileft > 0 && rx_cnt > 0) {
>> + todo = min(rx_cnt, ileft);
>> + ileft -= todo;
>> + do {
>> + writel_relaxed(*src32++,
>> + ss->base +
>> + SS_RXFIFO);
>> + todo--;
>> + } while (todo > 0);
>> + }
>> + if (tx_cnt > 0) {
>> + todo = min(tx_cnt, oleft);
>> + oleft -= todo;
>> + do {
>> + *dst32++ = readl_relaxed(ss->base +
>> + SS_TXFIFO);
>> + todo--;
>> + } while (todo > 0);
>> + }
>> + tmp = readl_relaxed(ss->base + SS_FCSR);
>> + rx_cnt = SS_RXFIFO_SPACES(tmp);
>> + tx_cnt = SS_TXFIFO_SPACES(tmp);
>> + } while (oleft > 0);
>> + writel(0, ss->base + SS_CTL);
>> + mutex_unlock(&ss->lock);
>> + kunmap_atomic(src_addr);
>> + kunmap_atomic(dst_addr);
>> + return 0;
>> + }
>> +
>> + /* If we have more than one SG, we cannot use kmap_atomic since
>> + * we hold the mapping too long*/
>
> Wrong comment style.
>
> btw. can't you use generic scatterwalk here ?

I will check if it simplify the code.

>
>> + src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
>> + if (src_addr == NULL) {
>> + dev_err(ss->dev, "KMAP error for src SG\n");
>> + return -1;
>> + }
>
> Why can't you just use dma_map_sg() or somesuch ?

I do not see why I will use a DMA function in a driver without DMA support.
Perhaps I do not know some tricks.
Can I use writel/readl on address gived by DMA API ?


>
> [...]
>> +EXPORT_SYMBOL_GPL(sunxi_aes_poll);
>
> Again, don't export the symbol please.
>
> [...]
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.h
>> b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.h new file mode 100644
>> index 0000000..ecfbf9c
>> --- /dev/null
>> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.h
>> @@ -0,0 +1,8 @@
>> +#include "sunxi-ss.h"
>> +
>> +extern struct sunxi_ss_ctx *ss;
>
> Right. Please make it into one module and you won't need all this horror.
> [...]
>

Thanks for your review

Regards

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-06-22 14:21    [W:0.083 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site