lkml.org 
[lkml]   [2014]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv6 2/3] devicetree: Addition of the Altera SDRAM EDAC
From
On Sat, Jun 21, 2014 at 4:06 AM, Steffen Trumtrar
<s.trumtrar@pengutronix.de> wrote:
> On Fri, Jun 20, 2014 at 06:22:02PM -0500, tthayer@altera.com wrote:
>> From: Thor Thayer <tthayer@altera.com>
>>
>> Addition of the Altera SDRAM EDAC bindings and device tree changes
>>
>> v2: Changes to SoC EDAC source code.
>>
>> v3: Fix typo in device tree documentation.
>>
>> v4,v5: No changes - bump version for consistency.
>>
>> v6: Assign ECC registers in SDRAM controller to EDAC
>>
>> Signed-off-by: Thor Thayer <tthayer@altera.com>
>> ---
>> .../bindings/arm/altera/socfpga-sdram-edac.txt | 15 +++++++++++++++
>> arch/arm/boot/dts/socfpga.dtsi | 6 ++++++
>> 2 files changed, 21 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
>> new file mode 100644
>> index 0000000..540c9cf
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
>> @@ -0,0 +1,15 @@
>> +Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
>> +
>> +Required properties:
>> +- compatible : should contain "altr,sdram-edac";
>> +- reg : should contain the ECC register range in sdram
>> + controller (address and length).
>> +- interrupts : Should contain the SDRAM ECC IRQ in the
>> + appropriate format for the IRQ controller.
>> +
>> +Example:
>> + sdramedac@0 {
>> + compatible = "altr,sdram-edac";
>> + reg = <0xffc2502C 0x28>;
>> + interrupts = <0 39 4>;
>> + };
>> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
>> index 310292e..fe9832e 100644
>> --- a/arch/arm/boot/dts/socfpga.dtsi
>> +++ b/arch/arm/boot/dts/socfpga.dtsi
>> @@ -687,6 +687,12 @@
>> reg = <0xffc25000 0x4>;
>> };
>>
>> + sdramedac@0 {
> ^^^
>
> Please fix the baseaddress (also in the binding doc).
>

Thanks. Good catch. I will fix this.

>> + compatible = "altr,sdram-edac";
>> + reg = <0xffc2502C 0x28>;
>> + interrupts = <0 39 4>;
>> + };
>> +
>> rst: rstmgr@ffd05000 {
>> compatible = "altr,rst-mgr";
>> reg = <0xffd05000 0x1000>;
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2014-06-22 21:01    [W:0.098 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site