lkml.org 
[lkml]   [2014]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH tty-next 13/22] serial: blackfin: Fix CTS flow control
Date
blackfin uart port drivers mistakenly set the struct uart_port
flags bit UPF_BUG_THRE (which only has meaning to the 8250 core)
while trying to set ASYNC_CTS_FLOW.

Uart port drivers can override termios settings based on actual
hardware support in their .set_termios method; the serial core
sets the appropriate port flags based on the overrides.
Overriding only the initial termios settings is accomplished
by only perform those overrides if the old termios parameter is
NULL.

CC: Sonic Zhang <sonic.zhang@analog.com>
CC: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/serial/bfin_sport_uart.c | 11 ++++++++---
drivers/tty/serial/bfin_uart.c | 13 ++++++++-----
2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 4f22970..5a1342e 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -500,6 +500,13 @@ static void sport_set_termios(struct uart_port *port,

pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);

+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ if (old == NULL && up->cts_pin != -1)
+ termios->c_cflag |= CRTSCTS;
+ else if (up->cts_pin == -1)
+ termios->c_cflag &= ~CRTSCTS;
+#endif
+
switch (termios->c_cflag & CSIZE) {
case CS8:
up->csize = 8;
@@ -813,10 +820,8 @@ static int sport_uart_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL)
sport->cts_pin = -1;
- else {
+ else
sport->cts_pin = res->start;
- sport->port.flags |= ASYNC_CTS_FLOW;
- }

res = platform_get_resource(pdev, IORESOURCE_IO, 1);
if (res == NULL)
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 869ceba..c641064 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -793,6 +793,13 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int ier, lcr = 0;
unsigned long timeout;

+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (old == NULL && uart->cts_pin != -1)
+ termios->c_cflag |= CRTSCTS;
+ else if (uart->cts_pin == -1)
+ termios->c_cflag &= ~CRTSCTS;
+#endif
+
switch (termios->c_cflag & CSIZE) {
case CS8:
lcr = WLS(8);
@@ -1325,12 +1332,8 @@ static int bfin_serial_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL)
uart->cts_pin = -1;
- else {
+ else
uart->cts_pin = res->start;
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- uart->port.flags |= ASYNC_CTS_FLOW;
-#endif
- }

res = platform_get_resource(pdev, IORESOURCE_IO, 1);
if (res == NULL)
--
2.0.0


\
 
 \ /
  Last update: 2014-06-16 16:21    [W:0.278 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site