lkml.org 
[lkml]   [2014]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [RFC PATCH 3/3] thermal: trace: Trace when temperature is above a trip point
Date
Thanks for the quick response.

Steven Rostedt <rostedt@goodmis.org> writes:

> On Wed, 11 Jun 2014 12:31:44 +0100
> Punit Agrawal <punit.agrawal@arm.com> wrote:
>
>> Create a new event to trace when the temperature is above a trip
>> point. Use the trace-point when handling non-critical and critical
>> trip pionts.
>>
>> Cc: Zhang Rui <rui.zhang@intel.com>
>> Cc: Eduardo Valentin <edubezval@gmail.com>
>> Cc: Steven Rostedt <rostedt@goodmis.org>
>> Cc: Frederic Weisbecker <fweisbec@gmail.com>
>> Cc: Ingo Molnar <mingo@redhat.com>
>> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
>> ---
>> Hi Steven,
>>
>> I am facing an issue with partial trace being emitted when using
>> __print_symbolic in this patch.
>>
>> When the trip_type is THERMAL_TRIP_ACTIVE (i.e., the first value in
>> the symbol map), the emitted trace contains the corresponding string
>> ("active"). But for other values of trip_type an empty string is
>> emitted in the trace.
>>
>> I've looked at other uses of __print_symbolic in the kernel and don't
>> see any difference in usage. Do you know what could be causing this or
>> alternately have any pointers on how to debug this behaviour?
>>
>
> If you can use trace-cmd to record your events then we can look at the
> raw data too.
>
> trace-cmd record -e thermal_zone_trip <some-command>
>
> where <some-command> would trigger your tracepoint.
>
> Then do: trace-cmd report -R
>
> You should see the raw value of trip_type.
>
> Make sure that it matches the enum values that you have listed.
>

I do indeed see the value of trip_type and it matches what's being
traced.

~# trace-cmd report | grep thermal_zone_trip | tail -n 5
kworker/2:2-1014 [002] 125.623213: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=
kworker/2:2-1014 [002] 125.743174: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=
kworker/2:2-1014 [002] 125.863196: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=
kworker/2:2-1014 [002] 125.983175: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=
kworker/2:2-1014 [002] 126.103173: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=
~# trace-cmd report -R | grep thermal_zone_trip | tail -n 5
kworker/2:2-1014 [002] 125.623213: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=1
kworker/2:2-1014 [002] 125.743174: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=1
kworker/2:2-1014 [002] 125.863196: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=1
kworker/2:2-1014 [002] 125.983175: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=1
kworker/2:2-1014 [002] 126.103173: thermal_zone_trip: thermal_zone=soc_thermal id=0 trip=0 trip_type=1

Is there something I should be doing to enable the translation to the
string representation when reporting using trace-cmd?

Cheers,
Punit

> -- Steve
>
>
>> Thanks.
>> Punit
>>
>> drivers/thermal/fair_share.c | 7 ++++++-
>> drivers/thermal/step_wise.c | 5 ++++-
>> drivers/thermal/thermal_core.c | 2 ++
>> include/trace/events/thermal.h | 30 ++++++++++++++++++++++++++++++
>> 4 files changed, 42 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c
>> index 944ba2f..2cddd68 100644
>> --- a/drivers/thermal/fair_share.c
>> +++ b/drivers/thermal/fair_share.c
>> @@ -23,6 +23,7 @@
>> */
>>
>> #include <linux/thermal.h>
>> +#include <trace/events/thermal.h>
>>
>> #include "thermal_core.h"
>>
>> @@ -34,14 +35,18 @@ static int get_trip_level(struct thermal_zone_device *tz)
>> {
>> int count = 0;
>> unsigned long trip_temp;
>> + enum thermal_trip_type trip_type;
>>
>> if (tz->trips == 0 || !tz->ops->get_trip_temp)
>> return 0;
>>
>> for (count = 0; count < tz->trips; count++) {
>> tz->ops->get_trip_temp(tz, count, &trip_temp);
>> - if (tz->temperature < trip_temp)
>> + if (tz->temperature < trip_temp) {
>> + tz->ops->get_trip_type(tz, count, &trip_type);
>> + trace_thermal_zone_trip(tz, count, trip_type);
>> break;
>> + }
>> }
>> return count;
>> }
>> diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
>> index f251521..3b54c2c 100644
>> --- a/drivers/thermal/step_wise.c
>> +++ b/drivers/thermal/step_wise.c
>> @@ -23,6 +23,7 @@
>> */
>>
>> #include <linux/thermal.h>
>> +#include <trace/events/thermal.h>
>>
>> #include "thermal_core.h"
>>
>> @@ -129,8 +130,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
>>
>> trend = get_tz_trend(tz, trip);
>>
>> - if (tz->temperature >= trip_temp)
>> + if (tz->temperature >= trip_temp) {
>> throttle = true;
>> + trace_thermal_zone_trip(tz, trip, trip_type);
>> + }
>>
>> dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n",
>> trip, trip_type, trip_temp, trend, throttle);
>> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
>> index c74c78d..454884a 100644
>> --- a/drivers/thermal/thermal_core.c
>> +++ b/drivers/thermal/thermal_core.c
>> @@ -371,6 +371,8 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
>> if (tz->temperature < trip_temp)
>> return;
>>
>> + trace_thermal_zone_trip(tz, trip, trip_type);
>> +
>> if (tz->ops->notify)
>> tz->ops->notify(tz, trip, trip_type);
>>
>> diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h
>> index 894a79e..5eeb1e7 100644
>> --- a/include/trace/events/thermal.h
>> +++ b/include/trace/events/thermal.h
>> @@ -51,6 +51,36 @@ TRACE_EVENT(cdev_update,
>> TP_printk("type=%s target=%lu", __get_str(type), __entry->target)
>> );
>>
>> +TRACE_EVENT(,
>> +
>> + TP_PROTO(struct thermal_zone_device *tz, int trip,
>> + enum thermal_trip_type trip_type),
>> +
>> + TP_ARGS(tz, trip, trip_type),
>> +
>> + TP_STRUCT__entry(
>> + __string(thermal_zone, tz->type)
>> + __field(int, id)
>> + __field(int, trip)
>> + __field(enum thermal_trip_type, trip_type)
>> + ),
>> +
>> + TP_fast_assign(
>> + __assign_str(thermal_zone, tz->type);
>> + __entry->id = tz->id;
>> + __entry->trip = trip;
>> + __entry->trip_type = trip_type;
>> + ),
>> +
>> + TP_printk("thermal_zone=%s id=%d trip=%d trip_type=%s",
>> + __get_str(thermal_zone), __entry->id, __entry->trip,
>> + __print_symbolic(__entry->trip_type,
>> + { THERMAL_TRIP_ACTIVE, "active" },
>> + { THERMAL_TRIP_PASSIVE, "passive" },
>> + { THERMAL_TRIP_HOT, "hot" },
>> + { THERMAL_TRIP_CRITICAL, "critical" }))
>> +);
>> +
>> #endif /* _TRACE_THERMAL_H */
>>
>> /* This part must be outside protection */


\
 
 \ /
  Last update: 2014-06-11 17:01    [W:0.206 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site