Messages in this thread | | | Date | Fri, 9 May 2014 14:57:45 +0200 | From | Nicolas Ferre <> | Subject | Re: [PATCH v2 2/2] iio:adc: at91 requires the input subsystem |
| |
On 09/05/2014 13:43, Arnd Bergmann : > On Friday 09 May 2014 12:01:48 Nicolas Ferre wrote: >> On 08/05/2014 16:56, Arnd Bergmann : >>> Building the at91 adc driver with CONFIG_INPUT disabled results in this >>> build error: >>> >>> ERROR: "input_event" [drivers/iio/adc/at91_adc.ko] undefined! >>> ERROR: "input_unregister_device" [drivers/iio/adc/at91_adc.ko] undefined! >>> ERROR: "input_free_device" [drivers/iio/adc/at91_adc.ko] undefined! >>> ERROR: "input_register_device" [drivers/iio/adc/at91_adc.ko] undefined! >>> ERROR: "input_set_abs_params" [drivers/iio/adc/at91_adc.ko] undefined! >>> ERROR: "input_allocate_device" [drivers/iio/adc/at91_adc.ko] undefined! >>> >>> To make sure we can build random configurations, this turns on CONFIG_INPUT >>> whenever CONFIG_AT91_ADC is enabled. >> >> Isn't it a "select" instead of "depends" that is required then? > > It seems I fixed the patch at some point but didn't update the message. > > In general, we should not mix 'depends on' and 'select' for the same symbol, > since that causes extra confusion. > > In case of CONFIG_INPUT, almost all the users do 'depends on INPUT', with > a few exceptions that seem to be done in error.
Ok, that makes sense.
> Updated patch below.
Thanks Arnd.
> Arnd > > 8<---- > >>From 4679d63b24a681d9c6afcfdde266bae0f940e90b Mon Sep 17 00:00:00 2001 > From: Arnd Bergmann <arnd@arndb.de> > Date: Wed, 9 Apr 2014 17:18:10 +0200 > Subject: [PATCH] [SUBMITTED] iio:adc: at91 requires the input subsystem > > Building the at91 adc driver with CONFIG_INPUT disabled results in this > build error: > > ERROR: "input_event" [drivers/iio/adc/at91_adc.ko] undefined! > ERROR: "input_unregister_device" [drivers/iio/adc/at91_adc.ko] undefined! > ERROR: "input_free_device" [drivers/iio/adc/at91_adc.ko] undefined! > ERROR: "input_register_device" [drivers/iio/adc/at91_adc.ko] undefined! > ERROR: "input_set_abs_params" [drivers/iio/adc/at91_adc.ko] undefined! > ERROR: "input_allocate_device" [drivers/iio/adc/at91_adc.ko] undefined! > > To make sure we can build random configurations, this adds a Kconfig > dependency on CONFIG_INPUT, as we do for other similar drivers. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Cc: linux-iio@vger.kernel.org > Cc: Josh Wu <josh.wu@atmel.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bye,
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 90f596d..a80d236 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -110,6 +110,7 @@ config AD799X > config AT91_ADC > tristate "Atmel AT91 ADC" > depends on ARCH_AT91 > + depends on INPUT > select IIO_BUFFER > select IIO_TRIGGERED_BUFFER > select SYSFS > > >
-- Nicolas Ferre
| |