lkml.org 
[lkml]   [2014]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/7] usb: ehci-platform: add optional reset controller retrieval
On Thu, 8 May 2014, Hans de Goede wrote:

> Hi,
>
> On 05/08/2014 12:00 AM, Maxime Ripard wrote:
> > On Wed, May 07, 2014 at 10:25:55AM -0400, Alan Stern wrote:
> >> On Tue, 6 May 2014, Maxime Ripard wrote:
> >>
> >>> From: Boris BREZILLON <boris.brezillon@free-electrons.com>
> >>>
> >>> On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to
> >>> be deasserted for the EHCI block to be usable.
> >>>
> >>> Add support for an optional reset controller that will be deasserted on
> >>> power off and asserted on power on.
> >>>
> >>> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
> >>> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> >>
> >> Is this really a _reset_ line? That is, when you assert the reset
> >> line, does it actually reset the EHCI controller, or does it merely
> >> leave the controller in a partially powered-down state?
> >
> > It actually resets the whole controller.
> >
> >> The difference is important. During suspend, the controller is
> >> supposed to remember the state of the port connections as well as other
> >> settings. If it doesn't, the controller and all attached USB devices
> >> will have to be reinitialized every time the controller resumes, which
> >> will increase the latency.
> >
> > So you're saying that we should move this to the probe then?
>
> Yes.

That's right. The controller should not be reset during suspend, if
you can possibly avoid it.

There isn't any real benefit to asserting the reset signal during
suspend, is there? I mean, it won't use any less power, right?

Alan Stern



\
 
 \ /
  Last update: 2014-05-08 16:41    [W:0.084 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site