lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [3.15-rc3] BUG: null ptr dereference in ichx_gpio_request_regions()
Hello Peter,

On Wed, May 07, 2014 at 09:22:37AM -0400, Peter Hurley wrote:
> Booting 3.15-rc3, I get this BUG when loading gpio_ich:
>
> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich]
> usbcore: registered new interface driver btusb
> PGD 2b04aa067 PUD 2af912067 PMD 0
> Oops: 0000 [#1] PREEMPT SMP
> Modules linked in: gpio_ich(+) btusb bluetooth psmouse snd i5400_edac ....
> CPU: 3 PID: 1217 Comm: modprobe Not tainted 3.15.0-rc3+wip-xeon #rc3+wip
> Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012
> task: ffff8802ae8448f0 ti: ffff8802b0d74000 task.ti: ffff8802b0d74000
> RIP: 0010:[<ffffffffa042339c>] [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich]
> RSP: 0018:ffff8802b0d75b78 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000100 RDI: ffffffff81c378a0
> RBP: ffff8802b0d75bb8 R08: 0000000000000000 R09: ffff880036a0e2c8
> R10: 0000000000005dc0 R11: 8000000000000000 R12: ffff880036a0e000
> R13: ffff8800bad62bc0 R14: 0000000000000003 R15: 0000000000000000
> FS: 00007fb9d38fa700(0000) GS:ffff8802bfcc0000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 00000002af445000 CR4: 00000000000007e0
> Stack:
> ffff8802b0d75b98 ffff880036a0e010 ffff880036a0e020 ffff880036a0e010
> ffffffffa0425028 ffffffffa0425028 0000000000000000 0000000000000001
> ffff8802b0d75be8 ffffffff814793f2 ffff8802b0d75ca8 ffff880036a0e010
> Call Trace:
> [<ffffffff814793f2>] platform_drv_probe+0x32/0x80
> [<ffffffff8147784b>] driver_probe_device+0x8b/0x3a0
> [<ffffffff81477c0b>] __driver_attach+0xab/0xb0
> [<ffffffff81477b60>] ? driver_probe_device+0x3a0/0x3a0
> [<ffffffff8147586d>] bus_for_each_dev+0x5d/0xa0
> [<ffffffff8147727e>] driver_attach+0x1e/0x20
> [<ffffffff81476dd4>] bus_add_driver+0x124/0x250
> [<ffffffffa029a000>] ? 0xffffffffa0299fff
> [<ffffffff81478314>] driver_register+0x64/0xf0
> [<ffffffffa029a000>] ? 0xffffffffa0299fff
> [<ffffffff8147926a>] __platform_driver_register+0x4a/0x50
> [<ffffffffa029a017>] ichx_gpio_driver_init+0x17/0x1000 [gpio_ich]
> [<ffffffff8100032a>] do_one_initcall+0xda/0x180
> [<ffffffff8103e733>] ? set_memory_nx+0x43/0x50
> [<ffffffff816ffeec>] ? set_section_ro_nx+0x6d/0x75
> [<ffffffff810cc9f9>] load_module+0x1d79/0x2770
> [<ffffffff810c8690>] ? unset_module_init_ro_nx+0x80/0x80
> [<ffffffff81172f80>] ? __vmalloc_node_range+0x170/0x250
> [<ffffffff810cd479>] ? SyS_init_module+0x89/0x100
> [<ffffffff810cd4a2>] SyS_init_module+0xb2/0x100
> [<ffffffff81719ad2>] system_call_fastpath+0x16/0x1b
> Code: c7 05 fd 1f 00 00 40 51 42 a0 e9 00 fe ff ff 48 8b 05 f1 1f 00 00 45 31 c0 48 c7 c7 a0 78 c3 81 48 8b 48 08 48 8b 50 10 48 63 c3 <0f> b6 34 01 4c 89 c9 0f b6 14 1a 49 03 75 00 4c 89 4d c8 e8 ec
> RIP [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich]
> RSP <ffff8802b0d75b78>
> CR2: 0000000000000000
>
>
> This is almost certainly caused by the uninitialized regs ptr
> in the ich6_desc struct (i3100_desc struct has the same problem)
> introduced in this commit:
>
> commit bb62a35bd5d96e506af0ea8dd145480b9172a2a6
> Author: Vincent Donnefort <vdonnefort@gmail.com>
> Date: Fri Feb 14 15:01:56 2014 +0100
>
> gpio: ich: Add support for multiple register addresses
>
> This patch introduces regs and reglen pointers which allow a chipset to have
> register addresses differing from ICH ones.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
>

Yes indeed, this must be linked to this thread https://lkml.org/lkml/2014/4/15/292

Regards,
Vincent.

>
> The relevant excerpts from the mixed listing are:
>
> 0000000000000110 <ichx_gpio_probe>:
>
> <...snip...>
>
> for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
> if (!(use_gpio & (1 << i)))
> continue;
> if (!request_region(
> 380: 48 8b 05 00 00 00 00 mov 0x0(%rip),%rax # 387 <ichx_gpio_probe+0x277>
> 383: R_X86_64_PC32 .bss+0xb4
> 387: 45 31 c0 xor %r8d,%r8d
> 38a: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
> 38d: R_X86_64_32S ioport_resource
> 391: 48 8b 48 08 mov 0x8(%rax),%rcx
> 395: 48 8b 50 10 mov 0x10(%rax),%rdx
> 399: 48 63 c3 movslq %ebx,%rax
> 39c: 0f b6 34 01 movzbl (%rcx,%rax,1),%esi <===== FAULTING INSTN
> 3a0: 4c 89 c9 mov %r9,%rcx
> 3a3: 0f b6 14 1a movzbl (%rdx,%rbx,1),%edx
> 3a7: 49 03 75 00 add 0x0(%r13),%rsi
> 3ab: 4c 89 4d c8 mov %r9,-0x38(%rbp)
> 3af: e8 00 00 00 00 callq 3b4 <ichx_gpio_probe+0x2a4>
> 3b0: R_X86_64_PC32 __request_region-0x4
> 3b4: 4c 8b 4d c8 mov -0x38(%rbp),%r9
> 3b8: 48 85 c0 test %rax,%rax
> 3bb: 0f 85 17 fe ff ff jne 1d8 <ichx_gpio_probe+0xc8>
> }
> return 0;
>
> request_err:
> /* Clean up: release already requested regions, if any */
> for (i--; i >= 0; i--) {
> 3c1: 41 83 ef 01 sub $0x1,%r15d
> 3c5: 41 83 ff ff cmp $0xffffffff,%r15d
> 3c9: 0f 84 d1 00 00 00 je 4a0 <ichx_gpio_probe+0x390>
> if (!(use_gpio & (1 << i)))
> 3cf: 45 0f a3 fe bt %r15d,%r14d
> 3d3: 73 ec jae 3c1 <ichx_gpio_probe+0x2b1>
>
>
> Regards,
> Peter Hurley



\
 
 \ /
  Last update: 2014-05-07 16:21    [W:0.903 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site