lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC/PATCH 3/3] DT: input: adp5589: add binding documentation
Date
Add documentation for the adp5589 DT binding.

Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
---
.../devicetree/bindings/input/adp5589.txt | 63 ++++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/adp5589.txt

diff --git a/Documentation/devicetree/bindings/input/adp5589.txt b/Documentation/devicetree/bindings/input/adp5589.txt
new file mode 100644
index 0000000..d4c295d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adp5589.txt
@@ -0,0 +1,63 @@
+Binding for the Analog Devices ADP5589 matrix decoder. The ADP5589 is a
+complex chip with many functions including matrix keypad decoding, reset
+event generator and gpio expansion. DT support is limited to keypad
+decoding.
+
+Required properties:
+
+- compatible: Should be "adi,adp5589"
+
+- linux,keymap: An array of packed cells each describing a mapping from
+a key to a linux keycode, as described in [1]. The macro MATRIX_KEY can
+be used to construct each mapping.
+
+Optional properties:
+
+- adp5589,scan-cycle-time-ms: The time between keymap polls in ms.
+Supported valued are 10, 20, 30 and 40. Other values are silently
+rounded down to the nearest supported value. Default: 10ms.
+
+- linux,no-autorepeat: Disable key auto repeat.
+
+- adp5589,pulldown-300k
+- adp5589,pullup-300k
+- adp5589,pullup-100k
+- adp5589,pull-disable: Set pull up/down/disable for the chip lines.
+Each is an OR'd value constructed with the macros ADP_COL and ADP_ROW.
+You can also use ~0 to specify all lines. It is an error for any two of
+these values have bits in common, and the driver will not load if so.
+
+Example node:
+
+&i2c0 {
+ keyboard {
+ compatible = "adi,adp5589";
+ reg = <0x34>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&kb_pins>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <19 GPIO_ACTIVE_HIGH>;
+
+ adp5589,scan-cycle-time-ms = <40>;
+
+ /* pull up all lines with a 300k resistor */
+ adp5589,pullup-300k = < (~0) >;
+
+ linux,no-autorepeat;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_0)
+ MATRIX_KEY(0, 1, KEY_1)
+ MATRIX_KEY(0, 2, KEY_2)
+
+ MATRIX_KEY(1, 0, KEY_F1)
+ MATRIX_KEY(1, 1, KEY_F2)
+ MATRIX_KEY(1, 2, KEY_F3)
+ >;
+ }
+}
+
+-------
+
+[1] Documentation/devicetree/bindings/input/matrix-keymap.txt
--
2.0.0.rc0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-07 15:41    [W:1.140 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site