lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 05/17] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller
Date
On Wednesday 07 May 2014 14:52:47 Kishon Vijay Abraham I wrote:
> On Tuesday 06 May 2014 10:05 PM, Jason Gunthorpe wrote:
> > On Tue, May 06, 2014 at 07:03:51PM +0530, Kishon Vijay Abraham I wrote:
> >> +Example:
> >> +pcie@51000000 {
> >> + compatible = "ti,dra7xx-pcie";
> >> + reg = <0x51002000 0x14c>, <0x51000000 0x2000>;
> >> + reg-names = "ti_conf", "rc_dbics";
> >> + interrupts = <0 232 0x4>, <0 233 0x4>;
> >> + #address-cells = >;
> >> + #size-cells = <2>;
> >> + device_type = "pci";
> >> + ti,device_type = >;
> >> + ranges = <0x00000800 0 0x20001000 0x20001000 0 0x00002000 /* Configuration Space */
> >
> > Configuration space should not show up in the ranges, please don't
> > copy that mistake from other drivers, put it in reg.
>
> But then it needs pcie-designware.c to be modified and it will be breaking
> other platforms no?

I think the pcie-designware driver should be changed to allow either way.
Ideally we would deprecate the existing method in a way that for new front-ends
it doesn't work, but the old front-ends can still deal with it but also work
if you put it into the reg property.

Arnd


\
 
 \ /
  Last update: 2014-05-07 12:01    [W:0.193 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site