lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] pwm-backlight: switch to gpiod interface
On Wed, May 7, 2014 at 5:18 PM, Thierry Reding <thierry.reding@gmail.com> wrote:
> On Thu, Feb 27, 2014 at 02:53:34PM +0900, Alexandre Courbot wrote:
>> Switch to the new gpiod interface, which allows to handle GPIO
>> properties such as active low transparently and removes a whole bunch of
>> code.
>>
>> There are still a couple of users of this driver that rely on passing
>> the enable GPIO number through platform data, so a fallback mechanism
>> using a GPIO number is still available to avoid breaking them. It will
>> be removed once current users have switched to the GPIO lookup tables
>> provided by the gpiod interface.
>>
>> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
>> ---
>> drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++++-----------------------
>> include/linux/pwm_backlight.h | 5 +--
>> 2 files changed, 32 insertions(+), 45 deletions(-)
>
> I've applied this with two tiny changes, see below. Please shout if you
> think that's a bad idea.

I'm fine with both changes. Thanks for picking these two guys!

Alex.

>
>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> [...]
>> @@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> [...]
>> + pb->enable_gpio = devm_gpiod_get(&pdev->dev, "enable");
>> + if (IS_ERR(pb->enable_gpio)) {
>> + ret = PTR_ERR(pb->enable_gpio);
>> + if (ret == -ENOENT) {
>> + pb->enable_gpio = NULL;
>> + ret = 0;
>> + } else {
>> + goto err_alloc;
>> + }
>
> I dropped the ret = 0 here because all error paths set it explicitly and
> the non-error path never uses it. Now all branches have a single
> statement and therefore the braces can be dropped.
>
>> + /*
>> + * Compatibility fallback for drivers still using the integer GPIO
>> + * platform data. Must go away soon.
>> + */
>> + if (pb->enable_gpio == NULL && gpio_is_valid(data->enable_gpio)) {
>
> Changed the first condition to !pb->enable_gpio for consistency.
>
> Thierry


\
 
 \ /
  Last update: 2014-05-07 11:21    [W:0.131 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site