lkml.org 
[lkml]   [2014]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 17/20] usb: phy: msm: Select secondary PHY via TCSR
From
Date
On Mon, 2014-04-28 at 16:34 +0300, Ivan T. Ivanov wrote:
> From: Tim Bird <tbird20d@gmail.com>
>
> Select the secondary PHY using the TCSR register, if phy-num=1
> in the DTS (or phy_number is set in the platform data). The
> SOC has 2 PHYs which can be used with the OTG port, and this
> code allows configuring the correct one.
>
> Note: This resolves the problem I was seeing where I couldn't
> get the USB driver working at all on a dragonboard, from cold
> boot. This patch depends on patch 5/14 from Ivan's msm USB
> patch set. It does not use DT for the register address, as
> there's no evidence that this address changes between SoC
> versions.
>
> Signed-off-by: Tim Bird <tim.bird@sonymobile.com>

Missed this:

Signed-of-by: Ivan T. Ivanov <iivanov@mm-sol.com>

Regards,
Ivan



\
 
 \ /
  Last update: 2014-05-03 09:01    [W:0.045 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site