lkml.org 
[lkml]   [2014]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 3/3] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC
Date
This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Yadwinder Singh Brar <yadi.brar@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-doc@vger.kernel.org
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index d81ba30..f7c9180 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@

-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator

The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.

Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+ or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.

Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS14: 1 to 25
+ - S2MPU02: 1 to 28
- Example: LDO1, LD02, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9

Example:
--
1.8.0


\
 
 \ /
  Last update: 2014-05-30 02:41    [W:0.082 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site