lkml.org 
[lkml]   [2014]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT PATCH] regulator: s2mpa01: Use correct register for buck[36] ramp delay
From
Date
On pon, 2014-05-26 at 13:37 +0530, Sachin Kamat wrote:
> Hi Krzysztof
>
> Apologies for the delay. I was on vacation during the early part of
> this month and
> got busy with some other stuff later and this mail fell through the cracks.
>
>
> On 23 May 2014 19:49, Krzysztof Kozlowski <k.kozlowski@samsung.com> wrote:
> > Hi Sachin,
> >
> > The s2mpa01 regulator driver uses wrong registers for ramp delay (buck1
> > and buck3 in RAMP1, buck6 in RAMP2) but I am not sure which layout is
> > proper (it seems that that buck1 should be in RAMP2 register).
> >
> > Could you check in S2MPA01 datasheet the registers for ramp delay for
> > buck1, buck3 and buck6?
>
> I checked the datasheet available with me and according to it
>
> buck 1 and 6 share the ramp register 0x11 (RAMP2) (bit 4 and 5) and buck 3 uses
> bit 4 and 5 of register 0x10 (RAMP1).

Thanks! I'll send updated version of the patchset.

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2014-05-26 11:41    [W:0.035 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site