lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/5] clk: bcm281xx: add an initialized flag
Date
Quoting Alex Elder (2014-05-20 05:52:38)
> Add a flag that tracks whether a clock has already been initialized.
> This will be used by the next patch to avoid initializing a clock
> more than once when it's listed as a prerequisite.
>
> Signed-off-by: Alex Elder <elder@linaro.org>
> ---
> drivers/clk/bcm/clk-kona.c | 17 +++++++++++++++--
> drivers/clk/bcm/clk-kona.h | 7 +++++++
> 2 files changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
> index d603c4e..d8a7f38 100644
> --- a/drivers/clk/bcm/clk-kona.c
> +++ b/drivers/clk/bcm/clk-kona.c
> @@ -27,6 +27,9 @@
> #define CCU_ACCESS_PASSWORD 0xA5A500
> #define CLK_GATE_DELAY_LOOP 2000
>
> +#define clk_is_initialized(_clk) FLAG_TEST((_clk), KONA, INITIALIZED)
> +#define clk_set_initialized(_clk) FLAG_SET((_clk), KONA, INITIALIZED)
> +
> /* Bitfield operations */
>
> /* Produces a mask of set bits covering a range of a 32-bit value */
> @@ -1194,13 +1197,23 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
>
> static bool __kona_clk_init(struct kona_clk *bcm_clk)
> {
> + bool ret;
> +
> + if (clk_is_initialized(bcm_clk))
> + return true;
> +
> switch (bcm_clk->type) {
> case bcm_clk_peri:
> - return __peri_clk_init(bcm_clk);
> + ret = __peri_clk_init(bcm_clk);

Hi Alex,

Going through this code, it's a bit hard to keep up ;-)

Does the call to __peri_clk_init enable the prereq clocks? If so, is
their clk->prepare_count and clk->enable_count properly incremented?

Thanks,
Mike

> + break;
> default:
> + ret = false;
> BUG();
> }
> - return -EINVAL;
> + if (ret)
> + clk_set_initialized(bcm_clk);
> +
> + return ret;
> }
>
> /* Set a CCU and all its clocks into their desired initial state */
> diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
> index 2537b30..10e238d 100644
> --- a/drivers/clk/bcm/clk-kona.h
> +++ b/drivers/clk/bcm/clk-kona.h
> @@ -406,6 +406,7 @@ struct kona_clk {
> struct clk_init_data init_data; /* includes name of this clock */
> struct ccu_data *ccu; /* ccu this clock is associated with */
> enum bcm_clk_type type;
> + u32 flags; /* BCM_CLK_KONA_FLAGS_* below */
> union {
> void *data;
> struct peri_clk_data *peri;
> @@ -414,6 +415,12 @@ struct kona_clk {
> #define to_kona_clk(_hw) \
> container_of(_hw, struct kona_clk, hw)
>
> +/*
> + * Kona clock flags:
> + * INITIALIZED clock has been initialized already
> + */
> +#define BCM_CLK_KONA_FLAGS_INITIALIZED ((u32)1 << 0) /* Clock initialized */
> +
> /* Initialization macro for an entry in a CCU's kona_clks[] array. */
> #define KONA_CLK(_ccu_name, _clk_name, _type) \
> { \
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2014-05-24 03:01    [W:0.121 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site