lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Patch v7 2/7] clock: keystone-pllctrl: add bindings for keystone pll controller
Date
Quoting Ivan Khoronzhuk (2014-05-23 08:43:27)
> The main pll controller used to drive theC66x CorePacs, the switch fabric,
> and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
> the NETCP modules) requires a PLL Controller to manage the various clock
> divisions, gating, and synchronization.
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>

Acked-by: Mike Turquette <mturquette@linaro.org>

Regards,
Mike

> ---
> .../bindings/clock/ti-keystone-pllctrl.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
> new file mode 100644
> index 0000000..3e6a81e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
> @@ -0,0 +1,20 @@
> +* Device tree bindings for Texas Instruments keystone pll controller
> +
> +The main pll controller used to drive theC66x CorePacs, the switch fabric,
> +and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
> +the NETCP modules) requires a PLL Controller to manage the various clock
> +divisions, gating, and synchronization.
> +
> +Required properties:
> +
> +- compatible: "ti,keystone-pllctrl", "syscon"
> +
> +- reg: contains offset/length value for pll controller
> + registers space.
> +
> +Example:
> +
> +pllctrl: pll-controller@0x02310000 {
> + compatible = "ti,keystone-pllctrl", "syscon";
> + reg = <0x02310000 0x200>;
> +};
> --
> 1.8.3.2
>


\
 
 \ /
  Last update: 2014-05-23 21:01    [W:0.145 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site