lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] of: Ensure unique names without sacrificing determinism
From
On Thu, May 22, 2014 at 6:36 PM, Grant Likely <grant.likely@linaro.org> wrote:
> The way the driver core is implemented, every device using the same bus
> type is required to have a unique name because a symlink to each device
> is created in the appropriate /sys/bus/*/devices directory, and two
> identical names causes a collision.
>
> The current code handles the requirement by using an globally
> incremented counter that is appended to the device name. It works, but
> it means any change to device registration will change the assigned
> numbers. Instead, if we build up the name by using information from the
> parent nodes, then it can be guaranteed to be unique without adding a
> random number to the end of it.
>
> Signed-off-by: Grant Likely <grant.likely@linaro.org>
> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
> Cc: Rob Herring <robh@kernel.org>

Acked-by: Rob Herring <robh@kernel.org>


> ---
> drivers/of/platform.c | 40 +++++++++++++++++++---------------------
> 1 file changed, 19 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index d0009b3614af..95c133a0554b 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -68,17 +68,15 @@ EXPORT_SYMBOL(of_find_device_by_node);
> * of_device_make_bus_id - Use the device node data to assign a unique name
> * @dev: pointer to device structure that is linked to a device tree node
> *
> - * This routine will first try using either the dcr-reg or the reg property
> - * value to derive a unique name. As a last resort it will use the node
> - * name followed by a unique number.
> + * This routine will first try using the translated bus address to
> + * derive a unique name. If it cannot, then it will prepend names from
> + * parent nodes until a unique name can be derived.
> */
> void of_device_make_bus_id(struct device *dev)
> {
> - static atomic_t bus_no_reg_magic;
> struct device_node *node = dev->of_node;
> const __be32 *reg;
> u64 addr;
> - int magic;
>
> #ifdef CONFIG_PPC_DCR
> /*
> @@ -100,25 +98,25 @@ void of_device_make_bus_id(struct device *dev)
> }
> #endif /* CONFIG_PPC_DCR */
>
> - /*
> - * For MMIO, get the physical address
> - */
> - reg = of_get_property(node, "reg", NULL);
> - if (reg) {
> - addr = of_translate_address(node, reg);
> - if (addr != OF_BAD_ADDR) {
> - dev_set_name(dev, "%llx.%s",
> - (unsigned long long)addr, node->name);
> + /* Construct the name, using parent nodes if necessary to ensure uniqueness */
> + while (node->parent) {
> + /*
> + * If the address can be translated, then that is as much
> + * uniqueness as we need. Make it the first component and return
> + */
> + reg = of_get_property(node, "reg", NULL);
> + if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
> + dev_set_name(dev, dev_name(dev) ? "%llx.%s:%s" : "%llx.%s",
> + (unsigned long long)addr, node->name,
> + dev_name(dev));
> return;
> }
> - }
>
> - /*
> - * No BusID, use the node name and add a globally incremented
> - * counter (and pray...)
> - */
> - magic = atomic_add_return(1, &bus_no_reg_magic);
> - dev_set_name(dev, "%s.%d", node->name, magic - 1);
> + /* format arguments only used if dev_name() resolves to NULL */
> + dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
> + strrchr(node->full_name, '/') + 1, dev_name(dev));
> + node = node->parent;
> + }
> }
>
> /**
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2014-05-23 16:41    [W:0.066 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site