lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: tty: Move HVC DCC assembly to arch/arm
Date
Put architecture-specific assembly code where it belongs,
allowing for support of additional architectures such as arm64 in
the future.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
---
arch/arm/include/asm/dcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
drivers/tty/hvc/hvc_dcc.c | 42 ++----------------------------------------
2 files changed, 43 insertions(+), 40 deletions(-)
create mode 100644 arch/arm/include/asm/dcc.h

diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h
new file mode 100644
index 0000000..b74899d
--- /dev/null
+++ b/arch/arm/include/asm/dcc.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/barrier.h>
+
+static inline u32 __dcc_getstatus(void)
+{
+ u32 __ret;
+ asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
+ : "=r" (__ret) : : "cc");
+
+ return __ret;
+}
+
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c));
+ isb();
+
+ return __c;
+}
+
+static inline void __dcc_putchar(char c)
+{
+ asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
+ : /* no output register */
+ : "r" (c));
+ isb();
+}
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 44fbeba..c3357b7 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,20 +8,11 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
*/

-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>

+#include <asm/dcc.h>
#include <asm/processor.h>

#include "hvc_console.h"
@@ -30,35 +21,6 @@
#define DCC_STATUS_RX (1 << 30)
#define DCC_STATUS_TX (1 << 29)

-static inline u32 __dcc_getstatus(void)
-{
- u32 __ret;
- asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
- : "=r" (__ret) : : "cc");
-
- return __ret;
-}
-
-
-static inline char __dcc_getchar(void)
-{
- char __c;
-
- asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
- : "=r" (__c));
- isb();
-
- return __c;
-}
-
-static inline void __dcc_putchar(char c)
-{
- asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
- : /* no output register */
- : "r" (c));
- isb();
-}
-
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
{
int i;
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by the Linux Foundation.


\
 
 \ /
  Last update: 2014-05-23 00:41    [W:0.657 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site