lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/8] mmc: sdhci-st: STMicroelectronics SDHCI binding documentation.
Date
This patch adds the device tree binding documentation for ST
SDHCI driver. It contains the differences between the core properties
in mmc.txt and the properties used by the sdhci-st driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
Documentation/devicetree/bindings/mmc/sdhci-st.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-st.txt

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
new file mode 100644
index 0000000..ae3dae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -0,0 +1,26 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-st driver
+
+Required properties:
+- compatible: "st,sdhci"
+- clocks: card clock, must be "mmc".
+
+Optional properties:
+- reset: to provide a reset to the HC.
+- non-removable: non-removable slot (bindings/mmc/mmc.txt).
+
+Example:
+
+mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+};
--
1.9.1


\
 
 \ /
  Last update: 2014-05-22 18:01    [W:0.164 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site