lkml.org 
[lkml]   [2014]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv5 09/10] DTS: ARM: OMAP3-N900: Add SSI support
Hi,

On Wed, May 21, 2014 at 12:45:28PM -0700, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [140521 11:44]:
> > * Sebastian Reichel <sre@kernel.org> [140521 11:26]:
> > > The hwmod data may be wrong. The information from commit
> > > 398917ce161e10d3c66afaefdb89c73c64c4b02d was simply
> > > interpolated from all information I found. The OMAP3
> > > public TRM does not contain *any* information about the
> > > ssi IP-Core.
>
> Yeah seems to be just reserved..

Right. The only documentation of the SSI module is existing
code sent by Carlos / included in the maemo kernel.

> > It's probably something with the sysc or idlemodes that
> > keeps things from idling. Maybe wrong address? Or wrong
> > flags? I'm pretty sure it was the first .dts patch out of
> > these two as the second one alone did not apply.
>
> Hmm yeah below is probably how it should be, does this
> work for you? With this fix applied and your ssi dts
> patches n900 keeps hitting off-idle for me.

I can confirm, that the N900 hits idle states when the DT
patch and the hwmod patch is applied. I have not actually
tested if it also works without your hwmod patch.

There are still problems with the idle state if the driver is
actually loaded (and I see 100% runtime pm usage in powertop),
but that can be fixed later.

Feel free to add Tested-by/Acked-By to the hwmod patch.

-- Sebastian
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-05-22 00:41    [W:0.048 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site