lkml.org 
[lkml]   [2014]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mm: filemap: Avoid unnecessary barries and waitqueue lookups in unlock_page fastpath v5
On Wed, 21 May 2014 13:15:01 +0100 Mel Gorman <mgorman@suse.de> wrote:

> Andrew had suggested dropping v4 of the patch entirely as the numbers were
> marginal and the complexity was high. However, even on a relatively small
> machine running simple workloads the overhead of page_waitqueue and wakeup
> functions is around 5% of system CPU time. That's quite high for basic
> operations so I felt it was worth another shot. The performance figures
> are better with this version than they were for v4 and overall the patch
> should be more comprehensible.
>
> Changelog since v4
> o Remove dependency on io_schedule_timeout
> o Push waiting logic down into waitqueue
>
> This patch introduces a new page flag for 64-bit capable machines,
> PG_waiters, to signal there are processes waiting on PG_lock and uses it to
> avoid memory barriers and waitqueue hash lookup in the unlock_page fastpath.
>
> This adds a few branches to the fast path but avoids bouncing a dirty
> cache line between CPUs. 32-bit machines always take the slow path but the
> primary motivation for this patch is large machines so I do not think that
> is a concern.
>
> The test case used to evaulate this is a simple dd of a large file done
> multiple times with the file deleted on each iterations. The size of
> the file is 1/10th physical memory to avoid dirty page balancing. In the
> async case it will be possible that the workload completes without even
> hitting the disk and will have variable results but highlight the impact
> of mark_page_accessed for async IO. The sync results are expected to be
> more stable. The exception is tmpfs where the normal case is for the "IO"
> to not hit the disk.
>
> The test machine was single socket and UMA to avoid any scheduling or
> NUMA artifacts. Throughput and wall times are presented for sync IO, only
> wall times are shown for async as the granularity reported by dd and the
> variability is unsuitable for comparison. As async results were variable
> do to writback timings, I'm only reporting the maximum figures. The sync
> results were stable enough to make the mean and stddev uninteresting.
>
> The performance results are reported based on a run with no profiling.
> Profile data is based on a separate run with oprofile running. The
> kernels being compared are "accessed-v2" which is the patch series up
> to this patch where as lockpage-v2 includes this patch.
>
> ...
>
> --- a/include/linux/wait.h
> +++ b/include/linux/wait.h
> @@ -147,8 +147,13 @@ void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr, void *k
> void __wake_up_locked(wait_queue_head_t *q, unsigned int mode, int nr);
> void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
> void __wake_up_bit(wait_queue_head_t *, void *, int);
> +void __wake_up_page_bit(wait_queue_head_t *, struct page *page, void *, int);

You're going to need to forward-declare struct page in wait.h. The
good thing about this is that less people will notice that we've gone
and mentioned struct page in wait.h :(

> int __wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned);
> +int __wait_on_page_bit(wait_queue_head_t *, struct wait_bit_queue *,
>
> ...
>
> --- a/kernel/sched/wait.c
> +++ b/kernel/sched/wait.c
> @@ -167,31 +167,39 @@ EXPORT_SYMBOL_GPL(__wake_up_sync); /* For internal use only */
> * stops them from bleeding out - it would still allow subsequent
> * loads to move into the critical region).
> */
> -void
> -prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state)
> +static inline void
> +__prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait,
> + struct page *page, int state, bool exclusive)

Putting MM stuff into core waitqueue code is rather bad. I really
don't know how I'm going to explain this to my family.

> {
> unsigned long flags;
>
> - wait->flags &= ~WQ_FLAG_EXCLUSIVE;
> spin_lock_irqsave(&q->lock, flags);
> - if (list_empty(&wait->task_list))
> - __add_wait_queue(q, wait);
> + if (page && !PageWaiters(page))
> + SetPageWaiters(page);

And this isn't racy because we're assuming that all users of `page' are
using the same waitqueue. ie, assuming all callers use
page_waitqueue()? Subtle, unobvious, worth documenting.

> + if (list_empty(&wait->task_list)) {
> + if (exclusive) {
> + wait->flags |= WQ_FLAG_EXCLUSIVE;
> + __add_wait_queue_tail(q, wait);
> + } else {
> + wait->flags &= ~WQ_FLAG_EXCLUSIVE;
> + __add_wait_queue(q, wait);
> + }
> + }
> set_current_state(state);
> spin_unlock_irqrestore(&q->lock, flags);
> }
>
> ...
>
> @@ -228,7 +236,8 @@ EXPORT_SYMBOL(prepare_to_wait_event);
> * the wait descriptor from the given waitqueue if still
> * queued.
> */
> -void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
> +static inline void __finish_wait(wait_queue_head_t *q, wait_queue_t *wait,
> + struct page *page)

Thusly does kerneldoc bitrot.

> {
> unsigned long flags;
>
> @@ -249,9 +258,16 @@ void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
> if (!list_empty_careful(&wait->task_list)) {
> spin_lock_irqsave(&q->lock, flags);
> list_del_init(&wait->task_list);
> + if (page && !waitqueue_active(q))
> + ClearPageWaiters(page);

And again, the assumption that all users of this page use the same
waitqueue avoids the races?

> spin_unlock_irqrestore(&q->lock, flags);
> }
> }
> +
> +void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
> +{
> + return __finish_wait(q, wait, NULL);
> +}
> EXPORT_SYMBOL(finish_wait);
>
> /**
> @@ -331,6 +347,22 @@ __wait_on_bit(wait_queue_head_t *wq, struct wait_bit_queue *q,
> finish_wait(wq, &q->wait);
> return ret;
> }
> +
> +int __sched
> +__wait_on_page_bit(wait_queue_head_t *wq, struct wait_bit_queue *q,
> + struct page *page,
> + int (*action)(void *), unsigned mode)

Comment over __wait_on_bit needs updating.

> +{
> + int ret = 0;
> +
> + do {
> + __prepare_to_wait(wq, &q->wait, page, mode, false);
> + if (test_bit(q->key.bit_nr, q->key.flags))
> + ret = (*action)(q->key.flags);
> + } while (test_bit(q->key.bit_nr, q->key.flags) && !ret);
> + __finish_wait(wq, &q->wait, page);
> + return ret;
> +}

__wait_on_bit() can now become a wrapper which calls this with page==NULL?

> EXPORT_SYMBOL(__wait_on_bit);

This export is now misplaced.

> int __sched out_of_line_wait_on_bit(void *word, int bit,
> @@ -344,6 +376,27 @@ int __sched out_of_line_wait_on_bit(void *word, int bit,
> EXPORT_SYMBOL(out_of_line_wait_on_bit);
>
> int __sched
> +__wait_on_page_bit_lock(wait_queue_head_t *wq, struct wait_bit_queue *q,
> + struct page *page,
> + int (*action)(void *), unsigned mode)
> +{
> + do {
> + int ret;
> +
> + __prepare_to_wait(wq, &q->wait, page, mode, true);
> + if (!test_bit(q->key.bit_nr, q->key.flags))
> + continue;
> + ret = action(q->key.flags);
> + if (!ret)
> + continue;
> + abort_exclusive_wait(wq, &q->wait, mode, &q->key);
> + return ret;
> + } while (test_and_set_bit(q->key.bit_nr, q->key.flags));
> + __finish_wait(wq, &q->wait, page);
> + return 0;
> +}

You are in a maze of twisty little functions, all alike. Perhaps some
rudimentary documentation here? Like what on earth does
__wait_on_page_bit_lock() actually do? And `mode'.


> +int __sched
> __wait_on_bit_lock(wait_queue_head_t *wq, struct wait_bit_queue *q,
> int (*action)(void *), unsigned mode)

Perhaps __wait_on_bit_lock() can become a wrapper around
__wait_on_page_bit_lock().

>
> ...
>
> --- a/mm/swap.c
> +++ b/mm/swap.c
> @@ -67,6 +67,10 @@ static void __page_cache_release(struct page *page)
> static void __put_single_page(struct page *page)
> {
> __page_cache_release(page);
> +
> + /* Clear dangling waiters from collisions on page_waitqueue */
> + __ClearPageWaiters(page);

What's this collisions thing?

> free_hot_cold_page(page, false);
> }
>
>
> ...
>
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -1096,6 +1096,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
> * waiting on the page lock, because there are no references.
> */
> __clear_page_locked(page);
> + __ClearPageWaiters(page);

We're freeing the page - if someone is still waiting on it then we have
a huge bug? It's the mysterious collision thing again I hope?

> free_it:
> nr_reclaimed++;
>
>
> ...
>



\
 
 \ /
  Last update: 2014-05-22 00:01    [W:0.147 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site