Messages in this thread Patch in this message | | | From | Lee Jones <> | Subject | [PATCH v2 2/3] ARM: sti: stih416: Enable board LED support for B2020 RevE | Date | Wed, 21 May 2014 09:45:23 +0100 |
| |
There are two LEDs available on the B2020 RevE board, one red, one green. In this patch we enable the red one for "heartbeat" and turn the green one off.
Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-b2020-revE.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts index da3c1c4..ba0fa2c 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -14,6 +14,20 @@ compatible = "st,stih416-b2020", "st,stih416"; soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + ethernet1: dwmac@fef08000 { snps,reset-gpio = <&PIO0 7>; }; -- 1.8.3.2
| |