lkml.org 
[lkml]   [2014]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI: Introduce new device binding path using pci_dev.driver_override

On 20.05.14 16:53, Alex Williamson wrote:
> The driver_override field allows us to specify the driver for a device
> rather than relying on the driver to provide a positive match of the
> device. This shortcuts the existing process of looking up the vendor
> and device ID, adding them to the driver new_id, binding the device,
> then removing the ID, but it also provides a couple advantages.
>
> First, the above existing process allows the driver to bind to any
> device matching the new_id for the window where it's enabled. This is
> often not desired, such as the case of trying to bind a single device
> to a meta driver like pci-stub or vfio-pci. Using driver_override we
> can do this deterministically using:
>
> echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
> echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
>
> Previously we could not invoke drivers_probe after adding a device
> to new_id for a driver as we get non-deterministic behavior whether
> the driver we intend or the standard driver will claim the device.
> Now it becomes a deterministic process, only the driver matching
> driver_override will probe the device.
>
> To return the device to the standard driver, we simply clear the
> driver_override and reprobe the device:
>
> echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
> echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
>
> Another advantage to this approach is that we can specify a driver
> override to force a specific binding or prevent any binding. For
> instance when an IOMMU group is exposed to userspace through VFIO
> we require that all devices within that group are owned by VFIO.
> However, devices can be hot-added into an IOMMU group, in which case
> we want to prevent the device from binding to any driver (override
> driver = "none") or perhaps have it automatically bind to vfio-pci.
> With driver_override it's a simple matter for this field to be set
> internally when the device is first discovered to prevent driver
> matches.
>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reviewed-by: Alexander Graf <agraf@suse.de>

I suppose Konrad's RB stays as well?


Alex



\
 
 \ /
  Last update: 2014-05-21 10:41    [W:0.050 / U:2.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site