lkml.org 
[lkml]   [2014]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 5/5] pci: keystone: add pcie driver based on designware core driver
On Tue, May 20, 2014 at 11:22:22AM -0600, Bjorn Helgaas wrote:
> On Tue, May 20, 2014 at 11:02 AM, Jason Gunthorpe
> <jgunthorpe@obsidianresearch.com> wrote:
> > On Fri, May 16, 2014 at 08:29:56PM +0000, Karicheri, Muralidharan wrote:
> >
> >> But pcie_bus_configure_settings just make sure the mrrs for a device
> >> is not greater than the max payload size.
> >
> > Not quite, it first scans the network checking the Maximum Payload Size
> > Supported (MPSS) for each device, and chooses the highest supported by
> > all as the MPS for all.
>
> The "performance" setting, e.g., "pci=pcie_bus_perf", adds a few
> wrinkles by setting MRRS in ways that allow some devices to have
> larger MPS than others. I don't think this is exactly what was
> envisioned in the spec, and it is not guaranteed to work if there is
> peer-to-peer DMA. This isn't documented very well; the best I know of
> is the changelogs for:
>
> a1c473aa11e6 pci: Clamp pcie_set_readrq() when using "performance" settings
> b03e7495a862 PCI: Set PCI-E Max Payload Size on fabric

Neat, and does pretty much confirm that setting the host bridge MPSS
properly is necessary to support all drivers, particularly the ones
that call pcie_set_readrq with any old value.

The 'performance' setting is a bit scary, it isn't just peer-to-peer
DMA that would be impacted but also CPU initiated burst writes. Eg
InfiniBand drivers burst a WQE to the NIC via the CPU. The MPS on the
root port bridge is used to segment the write. Probably not a problem
in practice because I think this is rare, and even rarer that a burst
would be > 128 bytes - but as you say, not really what the spec
intended..

Jason


\
 
 \ /
  Last update: 2014-05-20 20:21    [W:2.081 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site