Messages in this thread | ![/](/images/icornerl.gif) | | Date | Sat, 17 May 2014 10:46:36 +0100 | From | Russell King - ARM Linux <> | Subject | Re: [PATCH] ARM: remove ARM710 specific assembler code |
| |
On Sat, May 17, 2014 at 10:23:37AM +0100, Catalin Marinas wrote: > On Fri, May 16, 2014 at 01:55:46PM +0100, Russell King - ARM Linux wrote: > > There was a CPU called the ARM710, it was ARMv3 and it had no Thumb support. > > > > There is also a CPU called the ARM710T, which is ARMv4 and has Thumb support. > > > > These are two completely different CPUs, the former was removed along with > > the removal of ARMv3 support. The latter remains because we still support > > ARMv4. > > BTW, while clearly this patch was removing code for the wrong reasons, I > think we should set a longer term timeline for getting rid of some of > old features. Let's say in 10 years time we remove everything ARMv4, > another 10 years ARMv5 and so on. We could make these milestones shorter > but it really depends on what people use, we should not force them out > of the kernel if still in use.
I still use StrongARM based machines here, and I don't see that changing unless some suitably designed ARM boards come my way which (a) offer the same features and (b) out perform it.
The problem is that there's lots of ARM boards which satisfy (b) - the iMX6 stuff clearly does - but hardly anything which satisfies (a).
There's also been some recent effort with SA1100 SoC code, so there's also other interest there still.
So, ARMv4 is still very much in use with modern kernels.
The difference between what you're proposing and what happened to ARMv3 is that ARMv3 was broken for quite some time (we read from some of the CP15 registers which are read-only in ARMv3) and no one ever raised a problem with that. So, after a sufficient period of time, it got removed - and no one batted an eyelid. That's the correct way to do it - allow code to age, and if no one notices it's been broken, then it can be removed.
That process is slightly broken by the automated build testing we now have (provided people are looking at the results.)
-- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it.
| ![\](/images/icornerr.gif) |