Messages in this thread | | | Date | Thu, 15 May 2014 17:29:00 +0200 (CEST) | From | Jiri Kosina <> | Subject | Re: 3.15-rc: regression in suspend |
| |
On Wed, 14 May 2014, Pavel Machek wrote:
> > > > > > There seems to be regression in 3.15 w.r.t. suspend to ram and suspend > > > > > > to disk. > > > > > > > > > > > > Resume sometiems works, but often, system is half-usable, with "what > > > > > > do you want to do suspend/hibernate" dialog staying on screen. > > > > > > > > > > > > I did echo disk > /sys/power/state, and echo never returned to the > > > > > > shell prompt. (X was not really working, either.) > > > > > > > > > > > > It is still there on 3.15.0-rc3+. I'll update to rc5 now. > > > > > > > > > > 3.15.0-rc5+ seems to behave a bit better. Lets see if it reappears. > > > > > > > > It did. > > > > > > So it might in the end of the day the same thing as I have reported in > > > > > > https://bugs.freedesktop.org/show_bug.cgi?id=76554 > > > > > > which is not 100% reproducible either (although with newer kernels it's > > > *much* more reproducible for me than with older). > > > > > > > It worked few times on -rc5, but then I rebooted and problem > > > > re-appeared. > > > > > > If you could capture dmesg of the resume where X fails to resume properly > > > to see whether you have i915 ring initialization errors there as well? > > > > I did dmesg and I believe I would have noticed "*ERROR*" there.. but > > I'll of course capture the buffer when it happens. > > > > Note that X do work somehow after resume (I can't switch virtual > > desktops and dialog is stuck on screen, but it is not complete > > failure). I can do ctrl-alt-f1 and get to useful prompt. > > Oops. You were right. It seems it is duplicate after all. > > [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000
Pavel, thanks a lot for testing.
Adding Daniel and Chris to CC -- we have another incarnation of the bug that is being chased in 76554.
> Full dmesg is below. > > Oops, I already bisected one i915 regression this release :-(. > Pavel > > Initializing cgroup subsys cpu > Linux version 3.15.0-rc5+ (pavel@amd) (gcc version 4.4.5 (Debian 4.4.5-8) ) #355 SMP Tue May 13 18:19:09 CEST 2014 > e820: BIOS-provided physical RAM map: > BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable > BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved > BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved > BIOS-e820: [mem 0x0000000000100000-0x00000000bd87dfff] usable > BIOS-e820: [mem 0x00000000bd87e000-0x00000000bd900fff] ACPI NVS > BIOS-e820: [mem 0x00000000bd901000-0x00000000bda42fff] reserved > BIOS-e820: [mem 0x00000000bda43000-0x00000000bda56fff] ACPI NVS > BIOS-e820: [mem 0x00000000bda57000-0x00000000bdb54fff] reserved > BIOS-e820: [mem 0x00000000bdb55000-0x00000000bdb5dfff] ACPI data > BIOS-e820: [mem 0x00000000bdb5e000-0x00000000bdb67fff] ACPI NVS > BIOS-e820: [mem 0x00000000bdb68000-0x00000000bdb88fff] reserved > BIOS-e820: [mem 0x00000000bdb89000-0x00000000bdb8efff] ACPI NVS > BIOS-e820: [mem 0x00000000bdb8f000-0x00000000bdcfffff] usable > BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved > BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved > BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved > BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable > Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! > SMBIOS 2.4 present. > DMI: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 > e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > e820: remove [mem 0x000a0000-0x000fffff] usable > e820: last_pfn = 0xbdd00 max_arch_pfn = 0x100000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-E7FFF uncachable > E8000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 000000000 mask F00000000 write-back > 1 base 100000000 mask FC0000000 write-back > 2 base 0BDD00000 mask FFFF00000 write-through > 3 base 0BDE00000 mask FFFE00000 uncachable > 4 base 0BE000000 mask FFE000000 uncachable > 5 base 0C0000000 mask FC0000000 uncachable > 6 disabled > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > initial memory mapped: [mem 0x00000000-0x053fffff] > Base memory trampoline at [c009a000] 9a000 size 16384 > init_memory_mapping: [mem 0x00000000-0x000fffff] > [mem 0x00000000-0x000fffff] page 4k > init_memory_mapping: [mem 0x37000000-0x373fffff] > [mem 0x37000000-0x373fffff] page 4k > BRK [0x0510c000, 0x0510cfff] PGTABLE > init_memory_mapping: [mem 0x30000000-0x36ffffff] > [mem 0x30000000-0x36ffffff] page 4k > BRK [0x0510d000, 0x0510dfff] PGTABLE > BRK [0x0510e000, 0x0510efff] PGTABLE > BRK [0x0510f000, 0x0510ffff] PGTABLE > BRK [0x05110000, 0x05110fff] PGTABLE > BRK [0x05111000, 0x05111fff] PGTABLE > init_memory_mapping: [mem 0x00100000-0x2fffffff] > [mem 0x00100000-0x2fffffff] page 4k > init_memory_mapping: [mem 0x37400000-0x377fdfff] > [mem 0x37400000-0x377fdfff] page 4k > ACPI: RSDP 0x000F03C0 000024 (v02 INTEL ) > ACPI: XSDT 0xBDB5CE18 000044 (v01 INTEL DG41MJ 00000006 MSFT 00010013) > ACPI: FACP 0xBDB5BD98 0000F4 (v04 INTEL DG41RQ 00000006 MSFT 00010013) > ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xBDB5FF40/0x00000000BDB64F40, using 64-bit address (20140214/tbfadt-271) > ACPI: DSDT 0xBDB55018 005983 (v01 INTEL DG41MJ 00000006 INTL 20051117) > ACPI: FACS 0xBDB64F40 000040 > ACPI: APIC 0xBDB5BF18 00006C (v02 INTEL DG41MJ 00000006 MSFT 00010013) > ACPI: MCFG 0xBDB66E18 00003C (v01 INTEL DG41MJ 00000006 MSFT 00000097) > ACPI: HPET 0xBDB66D98 000038 (v01 INTEL DG41MJ 00000006 AMI. 00000003) > ACPI: Local APIC address 0xfee00000 > 2149MB HIGHMEM available. > 887MB LOWMEM available. > mapped low ram: 0 - 377fe000 > low ram: 0 - 377fe000 > Zone ranges: > DMA [mem 0x00001000-0x00ffffff] > Normal [mem 0x01000000-0x377fdfff] > HighMem [mem 0x377fe000-0xbdcfffff] > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x00001000-0x0009dfff] > node 0: [mem 0x00100000-0xbd87dfff] > node 0: [mem 0xbdb8f000-0xbdcfffff] > On node 0 totalpages: 776588 > free_area_init_node: node 0, pgdat c4b58980, node_mem_map f5885024 > DMA zone: 36 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3997 pages, LIFO batch:0 > Normal zone: 1962 pages used for memmap > Normal zone: 223230 pages, LIFO batch:31 > HighMem zone: 4836 pages used for memmap > HighMem zone: 549361 pages, LIFO batch:31 > Using APIC driver default > Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > smpboot: Allowing 4 CPUs, 2 hotplug CPUs > nr_irqs_gsi: 40 > PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] > PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] > PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] > PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] > e820: [mem 0xc0000000-0xfebfffff] available for PCI devices > setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 13 pages/cpu @f7794000 s29312 r0 d23936 u53248 > pcpu-alloc: s29312 r0 d23936 u53248 alloc=13*4096 > pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774590 > Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/x86/boot/bzImage root=/dev/sda3 resume=/dev/sda1 > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Initializing CPU#0 > xsave: enabled xstate_bv 0x3, cntxt size 0x240 > Initializing HighMem for node 0 (000377fe:000bdd00) > Initializing Movable for node 0 (00000000:00000000) > Memory: 3059448K/3106352K available (8175K kernel code, 533K rwdata, 3012K rodata, 492K init, 5108K bss, 46904K reserved, 2197444K highmem) > virtual kernel memory layout: > fixmap : 0xffe6f000 - 0xfffff000 (1600 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > .init : 0xc4b76000 - 0xc4bf1000 ( 492 kB) > .data : 0xc47fc1cf - 0xc4b746c0 (3553 kB) > .text : 0xc4000000 - 0xc47fc1cf (8176 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > Hierarchical RCU implementation. > RCU dyntick-idle grace-period acceleration is enabled. > RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. > RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > NR_IRQS:2304 nr_irqs:712 16 > CPU 0 irqstacks, hard=f541a000 soft=f541c000 > spurious 8259A interrupt: IRQ7. > Console: colour VGA+ 80x25 > console [tty0] enabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 8191 > ... CLASSHASH_SIZE: 4096 > ... MAX_LOCKDEP_ENTRIES: 16384 > ... MAX_LOCKDEP_CHAINS: 32768 > ... CHAINHASH_SIZE: 16384 > memory used by lock dependency info: 3551 kB > per task-struct memory footprint: 1152 bytes > ODEBUG: 11 of 11 active objects replaced > hpet clockevent registered > tsc: Fast TSC calibration using PIT > tsc: Detected 2800.142 MHz processor > Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.28 BogoMIPS (lpj=11200568) > pid_max: default: 32768 minimum: 301 > ACPI: Core revision 20140214 > ACPI: All ACPI Tables successfully acquired > Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) > Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 > Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 > tlb_flushall_shift: -1 > debug: unmapping init [mem 0xc4bf1000-0xc4bf8fff] > Enabling APIC mode: Flat. Using 1 I/O APICs > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 > smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (fam: 06, model: 17, stepping: 0a) > Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. > ... version: 2 > ... bit width: 40 > ... generic registers: 2 > ... value mask: 000000ffffffffff > ... max period: 000000007fffffff > ... fixed-purpose events: 3 > ... event mask: 0000000700000003 > CPU 1 irqstacks, hard=f55b8000 soft=f55ba000 > x86: Booting SMP configuration: > .... node #0, CPUs: #1 > Initializing CPU#1 > x86: Booted up 1 node, 2 CPUs > smpboot: Total of 2 processors activated (11200.56 BogoMIPS) > NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. > devtmpfs: initialized > PM: Registering ACPI NVS region [mem 0xbd87e000-0xbd900fff] (536576 bytes) > PM: Registering ACPI NVS region [mem 0xbda43000-0xbda56fff] (81920 bytes) > PM: Registering ACPI NVS region [mem 0xbdb5e000-0xbdb67fff] (40960 bytes) > PM: Registering ACPI NVS region [mem 0xbdb89000-0xbdb8efff] (24576 bytes) > NET: Registered protocol family 16 > cpuidle: using governor ladder > cpuidle: using governor menu > ACPI: bus type PCI registered > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > PCI: not using MMCONFIG > PCI: Using configuration type 1 for base access > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: SSDT 0xBDB5FC18 0002CC (v01 AMI IST 00000001 MSFT 03000001) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0x00000000 0002CC (v01 AMI IST 00000001 MSFT 03000001) > ACPI: Interpreter enabled > ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) > ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources > PCI: Using MMCONFIG for extended config space > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > ACPI: \_PR_.CPU3: failed to get CPU APIC ID. > ACPI: \_PR_.CPU4: failed to get CPU APIC ID. > ACPI: \_PR_.CPU5: failed to get CPU APIC ID. > ACPI: \_PR_.CPU6: failed to get CPU APIC ID. > ACPI: \_PR_.CPU7: failed to get CPU APIC ID. > ACPI: \_PR_.CPU8: failed to get CPU APIC ID. > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments] > acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] > pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 > pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400 > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: System wakeup disabled by ACPI > pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 > pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] > pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] > pci 0000:00:02.0: reg 0x20: [io 0xf140-0xf147] > pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 > pci 0000:00:02.1: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit] > pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 > pci 0000:00:1b.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: System wakeup disabled by ACPI > pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: System wakeup disabled by ACPI > pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 > pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] > pci 0000:00:1d.0: System wakeup disabled by ACPI > pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 > pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] > pci 0000:00:1d.1: System wakeup disabled by ACPI > pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 > pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] > pci 0000:00:1d.2: System wakeup disabled by ACPI > pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 > pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f] > pci 0000:00:1d.3: System wakeup disabled by ACPI > pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 > pci 0000:00:1d.7: reg 0x10: [mem 0xd0604000-0xd06043ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: System wakeup disabled by ACPI > pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 > pci 0000:00:1e.0: System wakeup disabled by ACPI > pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 > pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] > pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) > pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a > pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] > pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] > pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] > pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] > pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff] > pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] > pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] > pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] > pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] > pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f > pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7] > pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3] > pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7] > pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3] > pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 > pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] > pci 0000:00:01.0: PCI bridge to [bus 01] > pci 0000:00:1c.0: PCI bridge to [bus 02] > pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 > pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] > pci 0000:03:00.0: reg 0x18: [mem 0xd0514000-0xd0514fff 64bit pref] > pci 0000:03:00.0: reg 0x20: [mem 0xd0510000-0xd0513fff 64bit pref] > pci 0000:03:00.0: reg 0x30: [mem 0xd0500000-0xd050ffff pref] > pci 0000:03:00.0: supports D1 D2 > pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:1c.1: PCI bridge to [bus 03] > pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] > pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] > pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) > pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) > ACPI: Enabled 2 GPEs in block 00 to 1F > vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:00:02.0 > SCSI subsystem initialized > libata version 3.00 loaded. > ACPI: bus type USB registered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > PTP clock support registered > EDAC MC: Ver: 3.0.0 > Advanced Linux Sound Architecture Driver Initialized. > PCI: Using ACPI for IRQ routing > PCI: pci_cache_line_size set to 64 bytes > e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] > e820: reserve RAM buffer [mem 0xbd87e000-0xbfffffff] > e820: reserve RAM buffer [mem 0xbdd00000-0xbfffffff] > Bluetooth: Core ver 2.19 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO socket layer initialized > ------------[ cut here ]------------ > WARNING: CPU: 1 PID: 1 at net/wireless/reg.c:479 regulatory_init+0x88/0xf5() > db.txt is empty, you should update it... > Modules linked in: > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc5+ #355 > Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 > 000001df f5517e44 c47f5aaf c4a9ff8c f5517e74 c403875a c4aa9e34 f5517ea0 > 00000001 c4a9ff8c 000001df c4bac935 c4bac935 00000000 c4bac7d6 f5517ec8 > f5517e8c c40387fe 00000009 f5517e84 c4aa9e34 f5517ea0 f5517ecc c4bac935 > Call Trace: > [<c47f5aaf>] dump_stack+0x41/0x52 > [<c403875a>] warn_slowpath_common+0x7a/0xa0 > [<c4bac935>] ? regulatory_init+0x88/0xf5 > [<c4bac935>] ? regulatory_init+0x88/0xf5 > [<c4bac7d6>] ? cache_initialize+0x86/0x86 > [<c40387fe>] warn_slowpath_fmt+0x2e/0x30 > [<c4bac935>] regulatory_init+0x88/0xf5 > [<c4bac835>] cfg80211_init+0x5f/0xd7 > [<c4babe77>] ? bt_init+0x6e/0x98 > [<c40003fa>] do_one_initcall+0xca/0x180 > [<c406e4ab>] ? __wake_up+0x1b/0x50 > [<c4b76663>] ? repair_env_string+0x15/0x5b > [<c4051e61>] ? parse_args+0x1f1/0x440 > [<c4b765a9>] kernel_init_freeable+0xec/0x191 > [<c4b7664e>] ? kernel_init_freeable+0x191/0x191 > [<c47f228b>] kernel_init+0xb/0xe0 > [<c47facc1>] ret_from_kernel_thread+0x21/0x30 > [<c47f2280>] ? rest_init+0xb0/0xb0 > ---[ end trace 61e8190fed118a63 ]--- > cfg80211: Calling CRDA to update world regulatory domain > Switched to clocksource hpet > pnp: PnP ACPI init > ACPI: bus type PNP registered > system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved > system 00:00: [mem 0xe0000000-0xefffffff] has been reserved > system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) > system 00:01: [io 0x0800-0x087f] could not be reserved > system 00:01: [io 0x0480-0x04bf] has been reserved > system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved > system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved > system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved > system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved > system 00:01: [mem 0xff000000-0xffffffff] could not be reserved > system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:03: [dma 0 disabled] > pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:04: [dma 3] > pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) > pnp 00:05: [dma 4] > pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) > pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) > system 00:08: [io 0x04d0-0x04d1] has been reserved > system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) > pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) > pnp: PnP ACPI: found 11 devices > ACPI: bus type PNP unregistered > pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 > pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 > pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 > pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 > pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0700000-0xd08fffff] > pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0900000-0xd0afffff 64bit pref] > pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref] > pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > pci 0000:00:01.0: PCI bridge to [bus 01] > pci 0000:00:1c.0: PCI bridge to [bus 02] > pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff] > pci 0000:00:1c.0: bridge window [mem 0xd0900000-0xd0afffff 64bit pref] > pci 0000:00:1c.1: PCI bridge to [bus 03] > pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] > pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] > pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref] > pci 0000:00:1e.0: PCI bridge to [bus 04] > pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] > pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd08fffff] > pci_bus 0000:02: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref] > pci_bus 0000:03: resource 0 [io 0xe000-0xefff] > pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff] > pci_bus 0000:03: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref] > pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] > pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] > pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] > pci_bus 0000:04: resource 7 [mem 0xc0000000-0xffffffff] > NET: Registered protocol family 2 > TCP established hash table entries: 8192 (order: 3, 32768 bytes) > TCP bind hash table entries: 8192 (order: 6, 294912 bytes) > TCP: Hash tables configured (established 8192 bind 8192) > TCP: reno registered > UDP hash table entries: 512 (order: 3, 40960 bytes) > UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) > NET: Registered protocol family 1 > RPC: Registered named UNIX socket transport module. > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > pci 0000:00:02.0: Boot video device > PCI: CLS 64 bytes, default 64 > futex hash table entries: 1024 (order: 4, 65536 bytes) > bounce pool size: 64 pages > ntfs: driver 2.1.30 [Flags: R/W]. > fuse init (API version 7.23) > msgmni has been set to 1683 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed > usbcore: registered new interface driver udlfb > intel_idle: does not run on family 6 model 23 > input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > GHES: HEST is not enabled! > ERST DBG: ERST support is disabled. > Error: Driver 'battery' is already registered, aborting... > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A > lp: driver loaded but no devices found > Non-volatile memory driver v1.3 > intel_rng: Firmware space is locked read-only. If you can't or > intel_rng: don't want to disable this in firmware setup, and if > intel_rng: you are certain that your system has a functional > intel_rng: RNG, try using the 'no_fwh_detect' option. > Linux agpgart interface v0.103 > agpgart-intel 0000:00:00.0: Intel G41 Chipset > agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable > agpgart-intel 0000:00:00.0: detected 32768K stolen memory > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 > [drm] Initialized drm 1.1.0 20060810 > [drm] Memory usable by graphics device = 2048M > [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [drm] Driver supports precise vblank timestamp query. > vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > fbcon: inteldrmfb (fb0) is primary device > Console: switching to colour frame buffer device 192x60 > i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > i915 0000:00:02.0: registered panic notifier > ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140214/video-1251) > ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) > input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 > [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > parport_pc 00:04: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP(,...)] > lp0: using parport0 (interrupt-driven). > loop: module loaded > nbd: registered device at major 43 > ata_piix 0000:00:1f.1: version 2.13 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ata2: port disabled--ignoring > scsi2 : ata_piix > scsi3 : ata_piix > ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 > ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > e1000e: Copyright(c) 1999 - 2014 Intel Corporation. > r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf8024000, 00:27:0e:2a:43:71, XID 081000c0 IRQ 17 > r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] > PPP generic driver version 2.4.2 > PPP BSD Compression module registered > PPP Deflate Compression module registered > SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). > CSLIP: code copyright 1989 Regents of the University of California. > iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds > iwl3945: Copyright(c) 2003-2011 Intel Corporation > usbcore: registered new interface driver ax88179_178a > usbcore: registered new interface driver cdc_ether > usbcore: registered new interface driver net1080 > usbcore: registered new interface driver cdc_subset > usbcore: registered new interface driver zaurus > usbcore: registered new interface driver cdc_ncm > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci-pci: EHCI PCI platform driver > ehci-pci 0000:00:1d.7: EHCI Host Controller > ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci-pci 0000:00:1d.7: debug port 1 > ehci-pci 0000:00:1d.7: cache line size of 64 is not supported > ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0604000 > ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 3.15.0-rc5+ ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci-pci: OHCI PCI platform driver > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: detected 2 ports > uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: detected 2 ports > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: detected 2 ports > uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: detected 2 ports > uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > ata3.01: NODEV after polling detection > usb usb5: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.3 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > ata3.00: ATAPI: HL-DT-ST DVDRAM GT20N, CQ02, max UDMA/133 > usbcore: registered new interface driver cdc_acm > cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters > usbcore: registered new interface driver usblp > usbcore: registered new interface driver usb-storage > usbcore: registered new interface driver ums-sddr09 > usbcore: registered new interface driver usbserial > usbcore: registered new interface driver usbserial_generic > usbserial: USB Serial support registered for generic > usbcore: registered new interface driver ftdi_sio > usbserial: USB Serial support registered for FTDI USB Serial Device > usbcore: registered new interface driver option > usbserial: USB Serial support registered for GSM modem (1-port) > usbcore: registered new interface driver pl2303 > usbserial: USB Serial support registered for pl2303 > usbcore: registered new interface driver ti_usb_3410_5052 > usbserial: USB Serial support registered for TI USB 3410 1 port adapter > usbserial: USB Serial support registered for TI USB 5052 2 port adapter > driver ftdi-elan > usbcore: registered new interface driver ftdi-elan > i8042: PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > input: PC Speaker as /devices/platform/pcspkr/input/input4 > rtc_cmos 00:06: RTC can wake from S4 > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > ata3.00: configured for UDMA/133 > rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com > scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CQ02 PQ: 0 ANSI: 5 > Bluetooth: HCI UART driver ver 2.2 > Bluetooth: HCI H4 protocol initialized > Bluetooth: HCI BCSP protocol initialized > usbcore: registered new interface driver btusb > lguest: mapped switcher at ffe65000 > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > hidraw: raw HID events driver (C) Jiri Kosina > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > usbcore: registered new interface driver snd-usb-audio > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > cdrom: Uniform CD-ROM driver Revision: 3.20 > sr 2:0:0:0: Attached scsi CD-ROM sr0 > sr 2:0:0:0: Attached scsi generic sg0 type 5 > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP: cubic registered > NET: Registered protocol family 17 > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bluetooth: BNEP socket layer initialized > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > Bluetooth: HIDP socket layer initialized > Using IPI No-Shortcut mode > ata4.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133 > rtc_cmos 00:06: setting system clock to 2014-05-13 19:46:01 UTC (1400010361) > ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) > PM: Checking hibernation image partition /dev/sda1 > sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line > sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > sound hdaudioC0D2: mono: mono_out=0x0 > sound hdaudioC0D2: inputs: > sound hdaudioC0D2: Front Mic=0x19 > sound hdaudioC0D2: Rear Mic=0x18 > sound hdaudioC0D2: Line=0x1a > input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 > input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 > input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > usb 1-4: new high-speed USB device number 2 using ehci-pci > ata4.00: configured for UDMA/133 > scsi 3:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5 > sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 3:0:0:0: Attached scsi generic sg1 type 0 > sd 3:0:0:0: [sda] 4096-byte physical blocks > sd 3:0:0:0: [sda] Write Protect is off > sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 > sd 3:0:0:0: [sda] Attached SCSI disk > PM: Hibernation image partition 8:1 present > PM: Looking for hibernation image. > PM: Image not found (code -22) > PM: Hibernation image not present or could not be loaded. > ALSA device list: > #0: HDA Intel at 0xd0600000 irq 16 > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda3): mounted filesystem with ordered data mode > VFS: Mounted root (ext3 filesystem) readonly on device 8:3. > devtmpfs: mounted > debug: unmapping init [mem 0xc4b76000-0xc4bf0fff] > Write protecting the kernel text: 8180k > Write protecting the kernel read-only data: 3016k > usb 1-4: New USB device found, idVendor=058f, idProduct=6362 > usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-4: Product: Mass Storage Device > usb 1-4: Manufacturer: Generic > usb 1-4: SerialNumber: 058F312D81B > usb-storage 1-4:1.0: USB Mass Storage device detected > scsi4 : usb-storage 1-4:1.0 > tsc: Refined TSC clocksource calibration: 2799.956 MHz > udev[1661]: starting version 164 > usb 5-1: new low-speed USB device number 2 using uhci_hcd > usb 5-1: New USB device found, idVendor=046d, idProduct=c050 > usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-1: Product: USB-PS/2 Optical Mouse > usb 5-1: Manufacturer: Logitech > input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C050.0001/input/input10 > hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1/input0 > usb 5-2: new low-speed USB device number 3 using uhci_hcd > scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 > sd 4:0:0:0: Attached scsi generic sg2 type 0 > scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 > sd 4:0:0:0: [sdb] Attached SCSI removable disk > sd 4:0:0:1: Attached scsi generic sg3 type 0 > scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 > sd 4:0:0:1: [sdc] Attached SCSI removable disk > sd 4:0:0:2: Attached scsi generic sg4 type 0 > scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 > sd 4:0:0:2: [sdd] Attached SCSI removable disk > Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 across:2097148k > sd 4:0:0:3: Attached scsi generic sg5 type 0 > sd 4:0:0:3: [sde] Attached SCSI removable disk > Switched to clocksource tsc > EXT3-fs (sda3): using internal journal > usb 5-2: New USB device found, idVendor=04f2, idProduct=0111 > usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-2: Product: USB Keyboard > usb 5-2: Manufacturer: Chicony > input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0111.0002/input/input11 > hid-generic 0003:04F2:0111.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0 > input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0111.0003/input/input12 > hid-generic 0003:04F2:0111.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1 > EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended > EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro > EXT3-fs (sda4): error: can't find ext3 filesystem on dev sda4. > random: nonblocking pool is initialized > input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 > r8169 0000:03:00.0: Direct firmware load failed with error -2 > r8169 0000:03:00.0: Falling back to user helper > r8169 0000:03:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12) > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link down > sshd (3175): /proc/3175/oom_adj is deprecated, please use /proc/3175/oom_score_adj instead. > r8169 0000:03:00.0 eth1: link up > perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 > perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.006 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. > PM: Entering mem sleep > Suspending console(s) (use no_console_suspend to debug) > sd 3:0:0:0: [sda] Synchronizing SCSI cache > parport_pc 00:04: disabled > sd 3:0:0:0: [sda] Stopping disk > serial 00:03: disabled > serial 00:03: System wakeup disabled by ACPI > PM: suspend of devices complete after 334.723 msecs > PM: suspend devices took 0.336 seconds > PM: late suspend of devices complete after 16.001 msecs > pcieport 0000:00:1c.1: System wakeup enabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI > PM: noirq suspend of devices complete after 16.089 msecs > ACPI: Preparing to enter system sleep state S3 > PM: Saving platform NVS memory > Disabling non-boot CPUs ... > smpboot: CPU 1 is now offline > ACPI: Low-level resume complete > PM: Restoring platform NVS memory > Enabling non-boot CPUs ... > x86: Booting SMP configuration: > smpboot: Booting Node 0 Processor 1 APIC 0x1 > Initializing CPU#1 > TSC synchronization [CPU#0 -> CPU#1]: > Measured 2298956531 cycles TSC warp between CPUs, turning off TSC clock. > tsc: Marking TSC unstable due to check_tsc_sync_source failed > CPU1 is up > ACPI: Waking up from system sleep state S3 > ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event > ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event > Switched to clocksource hpet > uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI > PM: noirq resume of devices complete after 1270502.801 msecs > PM: early resume of devices complete after 1.691 msecs > usb usb2: root hub lost power or was reset > usb usb3: root hub lost power or was reset > usb usb4: root hub lost power or was reset > usb usb5: root hub lost power or was reset > serial 00:03: activated > parport_pc 00:04: activated > pcieport 0000:00:1c.1: System wakeup disabled by ACPI > ata2: port disabled--ignoring > sd 3:0:0:0: [sda] Starting disk > ata3.01: NODEV after polling detection > ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded > ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > ata3.00: configured for UDMA/133 > ata4.00: configured for UDMA/133 > usb 5-2: reset low-speed USB device number 3 using uhci_hcd > usb 5-1: reset low-speed USB device number 2 using uhci_hcd > PM: resume of devices complete after 2922.312 msecs > PM: resume devices took 2.924 seconds > ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() > PM: Finishing wakeup. > Restarting tasks ... > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > done. > video LNXVIDEO:00: Restoring backlight state > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link up > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.010 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.011 seconds) done. > PM: Entering mem sleep > Suspending console(s) (use no_console_suspend to debug) > sd 3:0:0:0: [sda] Synchronizing SCSI cache > sd 3:0:0:0: [sda] Stopping disk > parport_pc 00:04: disabled > serial 00:03: disabled > serial 00:03: System wakeup disabled by ACPI > PM: suspend of devices complete after 322.768 msecs > PM: suspend devices took 0.324 seconds > PM: late suspend of devices complete after 15.985 msecs > pcieport 0000:00:1c.1: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI > PM: noirq suspend of devices complete after 16.100 msecs > ACPI: Preparing to enter system sleep state S3 > PM: Saving platform NVS memory > Disabling non-boot CPUs ... > smpboot: CPU 1 is now offline > ACPI: Low-level resume complete > PM: Restoring platform NVS memory > Enabling non-boot CPUs ... > x86: Booting SMP configuration: > smpboot: Booting Node 0 Processor 1 APIC 0x1 > Initializing CPU#1 > CPU1 is up > ACPI: Waking up from system sleep state S3 > ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event > ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event > uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI > PM: noirq resume of devices complete after 13.758 msecs > PM: early resume of devices complete after 1.325 msecs > usb usb2: root hub lost power or was reset > usb usb3: root hub lost power or was reset > usb usb4: root hub lost power or was reset > usb usb5: root hub lost power or was reset > serial 00:03: activated > parport_pc 00:04: activated > pcieport 0000:00:1c.1: System wakeup disabled by ACPI > ata2: port disabled--ignoring > sd 3:0:0:0: [sda] Starting disk > ata3.01: NODEV after polling detection > ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded > ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > ata3.00: configured for UDMA/133 > ata4.00: configured for UDMA/133 > usb 5-2: reset low-speed USB device number 3 using uhci_hcd > usb 5-1: reset low-speed USB device number 2 using uhci_hcd > PM: resume of devices complete after 3046.488 msecs > PM: resume devices took 3.048 seconds > ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() > PM: Finishing wakeup. > Restarting tasks ... > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > done. > video LNXVIDEO:00: Restoring backlight state > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link up > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.011 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. > PM: Entering mem sleep > Suspending console(s) (use no_console_suspend to debug) > sd 3:0:0:0: [sda] Synchronizing SCSI cache > parport_pc 00:04: disabled > serial 00:03: disabled > serial 00:03: System wakeup disabled by ACPI > sd 3:0:0:0: [sda] Stopping disk > PM: suspend of devices complete after 350.696 msecs > PM: suspend devices took 0.352 seconds > PM: late suspend of devices complete after 15.995 msecs > pcieport 0000:00:1c.1: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI > uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI > PM: noirq suspend of devices complete after 16.097 msecs > ACPI: Preparing to enter system sleep state S3 > PM: Saving platform NVS memory > Disabling non-boot CPUs ... > smpboot: CPU 1 is now offline > ACPI: Low-level resume complete > PM: Restoring platform NVS memory > Enabling non-boot CPUs ... > x86: Booting SMP configuration: > smpboot: Booting Node 0 Processor 1 APIC 0x1 > Initializing CPU#1 > CPU1 is up > ACPI: Waking up from system sleep state S3 > ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event > ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event > ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event > uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI > uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI > ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI > PM: noirq resume of devices complete after 16.838 msecs > PM: early resume of devices complete after 1.327 msecs > usb usb2: root hub lost power or was reset > usb usb3: root hub lost power or was reset > usb usb4: root hub lost power or was reset > usb usb5: root hub lost power or was reset > pcieport 0000:00:1c.1: System wakeup disabled by ACPI > serial 00:03: activated > parport_pc 00:04: activated > ata2: port disabled--ignoring > sd 3:0:0:0: [sda] Starting disk > [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000 > ata3.01: NODEV after polling detection > ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out > ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded > ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out > dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -5 > PM: Device 0000:00:02.0 failed to resume async: error -5 > ata3.00: configured for UDMA/133 > ata4.00: configured for UDMA/133 > usb 5-1: reset low-speed USB device number 2 using uhci_hcd > usb 5-2: reset low-speed USB device number 3 using uhci_hcd > PM: resume of devices complete after 2964.956 msecs > PM: resume devices took 2.964 seconds > ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() > PM: Finishing wakeup. > Restarting tasks ... > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() > i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment > pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment > pci 0000:00:1e.0: PCI bridge to [bus 04] > agpgart-intel 0000:00:00.0: no hotplug settings from platform > agpgart-intel 0000:00:00.0: using default PCI settings > pcieport 0000:00:01.0: no hotplug settings from platform > i915 0000:00:02.0: no hotplug settings from platform > i915 0000:00:02.0: using default PCI settings > pci 0000:00:02.1: no hotplug settings from platform > pci 0000:00:02.1: using default PCI settings > snd_hda_intel 0000:00:1b.0: no hotplug settings from platform > pcieport 0000:00:1c.0: no hotplug settings from platform > pcieport 0000:00:1c.1: no hotplug settings from platform > r8169 0000:03:00.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: no hotplug settings from platform > uhci_hcd 0000:00:1d.0: using default PCI settings > uhci_hcd 0000:00:1d.1: no hotplug settings from platform > uhci_hcd 0000:00:1d.1: using default PCI settings > uhci_hcd 0000:00:1d.2: no hotplug settings from platform > uhci_hcd 0000:00:1d.2: using default PCI settings > uhci_hcd 0000:00:1d.3: no hotplug settings from platform > uhci_hcd 0000:00:1d.3: using default PCI settings > ehci-pci 0000:00:1d.7: no hotplug settings from platform > ehci-pci 0000:00:1d.7: using default PCI settings > pci 0000:00:1e.0: no hotplug settings from platform > pci 0000:00:1e.0: using default PCI settings > pci 0000:00:1f.0: no hotplug settings from platform > pci 0000:00:1f.0: using default PCI settings > ata_piix 0000:00:1f.1: no hotplug settings from platform > ata_piix 0000:00:1f.1: using default PCI settings > ata_piix 0000:00:1f.2: no hotplug settings from platform > ata_piix 0000:00:1f.2: using default PCI settings > pci 0000:00:1f.3: no hotplug settings from platform > pci 0000:00:1f.3: using default PCI settings > done. > video LNXVIDEO:00: Restoring backlight state > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link down > r8169 0000:03:00.0 eth1: link up > > > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html >
-- Jiri Kosina SUSE Labs
| |