lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] bluetooth: raise HCI_CMD_TIMEOUT from 2s to 8s
Am 15.05.2014 14:54, schrieb Luiz Augusto von Dentz:
> Hi Alexander,
>
> On Wed, May 14, 2014 at 5:00 PM, Alexander Holler <holler@ahsoftware.de> wrote:
>> The reasoning to do this is the following:
>>
>> - If a timeout occurs, the HCI-communication is broken afterwards and the
>> dongle isn't usable anymore.
>> - If it works after e.g. waiting 4s everyone is still happy but if it
>> just breaks after only waiting 2s nothing is gained.
>> - Having to wait some more seconds until an error occurs doesn't change
>> anything.
>>
>> So there is no disadvantage in rasing the timeout but a great advantage
>> in case the dongle needs more than 2s to process an HCI command.
>> E.g. I had sometimes HCI command timeouts at boot (but never after the BT stack
>> was successfull started). I assume the reason might be the USB-probing which
>> happend before through the bootloader, which might have confused the dongle
>> such that it needs a bit more time, but I'm not sure.
>>
>> Together with the patch which limits the timeout only to the actual time the
>> dongle needs to process an HCI command (and doesn't include the time the
>> kernel needs to process the answer to an HCI command), my problems were gone.
>>
>> Signed-off-by: Alexander Holler <holler@ahsoftware.de>
>> ---
>> include/net/bluetooth/hci.h | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>> index be150cf..d50fd34 100644
>> --- a/include/net/bluetooth/hci.h
>> +++ b/include/net/bluetooth/hci.h
>> @@ -180,7 +180,7 @@ enum {
>> #define HCI_DISCONN_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> #define HCI_PAIRING_TIMEOUT msecs_to_jiffies(60000) /* 60 seconds */
>> #define HCI_INIT_TIMEOUT msecs_to_jiffies(10000) /* 10 seconds */
>> -#define HCI_CMD_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> +#define HCI_CMD_TIMEOUT msecs_to_jiffies(8000) /* 8 seconds */
>> #define HCI_ACL_TX_TIMEOUT msecs_to_jiffies(45000) /* 45 seconds */
>> #define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> #define HCI_POWER_OFF_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */
>> --
>> 1.8.3.1
>
> This timeout seems arbitrary so I suppose we can increase it if we
> feel it is necessary but we used already different timeout for
> different commands like HCI_POWER_OFF_TIMEOUT, so perhaps if we can
> identify which command is more likely to timeout.
>
> We could perhaps auto reset if a command timeout if there is really no
> other way to recover.

It is arbitrary but 2s is not enough here. And as I've written in the
description, there is absolutely no reason to keep this timeout
unnecessarily short. No one cares if an error message appears after 2s
or 8s if the communication with the dongle is in both cases broken
afterwards.

One of the commands I experieced the problem with was e.g.
HCI_OP_DELETE_STORED_LINK_KEY or HCI_OP_WRITE_SSP_MODE.

Regards,

Alexander Holler


\
 
 \ /
  Last update: 2014-05-15 17:41    [W:1.959 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site