lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: zynq: dt: Add a fixed regulator for CPU voltage
ping? Any comments?

Thanks,
Sören

On Fri, 2014-05-02 at 02:07PM -0700, Soren Brinkmann wrote:
> To silence the warning
> cpufreq_cpu0: failed to get cpu0 regulator: -19
> from the cpufreq driver regarding a missing regulator,
> add a fixed regulator to the DT.
> Zynq does not support voltage scaling and the CPU rail should always be
> supplied with 1 V, hence it is added in the SOC-level dtsi.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
>
> arch/arm/boot/dts/zynq-7000.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index c1176abc34d9..64779f9d5c38 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -25,6 +25,7 @@
> reg = <0>;
> clocks = <&clkc 3>;
> clock-latency = <1000>;
> + cpu0-supply = <&regulator_vccpint>;
> operating-points = <
> /* kHz uV */
> 666667 1000000
> @@ -48,6 +49,15 @@
> reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
> };
>
> + regulator_vccpint: fixedregulator@0 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCCPINT";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> amba {
> compatible = "simple-bus";
> #address-cells = <1>;
> --
> 1.9.2.1.g06c4abd
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-15 17:41    [W:0.040 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site