lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 00/25] Change time_t and clock_t to 64 bit
Date
On Wednesday 14 May 2014 14:33:18 John Stultz wrote:
> On Tue, May 13, 2014 at 12:32 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Tuesday 13 May 2014 20:24:59 Geert Uytterhoeven wrote:
> >> On Tue, May 13, 2014 at 8:10 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> >> > Using 64-bit time_t on x32 is fine, because it's fast to operate
> >> > in user space with 64-bit registers, and the kernel is 64-bit
> >> > anyway. Inside of the kernel, we may get into trouble using
> >> > a 64-bit time_t on 32-bit architectures because of the overhead
> >> > in 64-bit math, e.g. all the timekeeping code that is based on
> >> > timespec or some code paths in file systems and network code where
> >> > we actually require division of time_t values.
> >>
> >> While going over time_t uses, have you found a pattern for use cases
> >> involving division of time_t values in filesystem and networking code?
> >
> > In ipv4, we have multiple places doing this:
> >
> > icmp_param.data.times[1] = htonl((tv.tv_sec % 86400) * MSEC_PER_SEC +
> > tv.tv_nsec / NSEC_PER_MSEC);
> >
> > to calculate the miliseconds since midnight. For file systems, I
> > found that FAT uses seconds/minutes/hours/days/month/year representation,
> > which is a lot of divides, but that can probably be optimized and
> > we need to handle years beyond 2038 anyway.
>
> We can do some tricks for internal optimizations here if these are
> critical. I'd be more concerned about userland divisions where moving
> to a 64bit time_t would cause performance issues that we cannot help
> optimize.

Good point.

> >> > We clearly have to change that code in some for to deal with y2038,
> >> > but 64-bit time_t may not be the best option. A lot of the
> >> > in-kernel code can probably use ktime_t, which we can change
> >> > to a different representation (e.g. 34 bit seconds) if needed,
> >> > and all the code that is only interested in relative time
> >> > (e.g. nanosleep) doesn't have to change at all.
> >>
> >> Yeah. 32-bit uptimes should be good enough for everyone (don't quote
> >> me on that), so adding a 64-bit offset when there's a need for absolute
> >> time should be OK.
> >
> > I think we have three categories:
> >
> > a) interfaces that uses relative time_t/timespec/timeval:
> > - nanosleep
> > - select/pselect/poll/ppoll/epoll
> > - getrusage
> > - sched_rr_get_interval
> > - sigtimedwait
> > - clock_nanosleep
> > - alarm
> > - siginfo (rusage)
> >
> > These can stay compatible, but we'd have to use a different
> > type if we change time_t.
>
>
> So as a correction, at least clock_nanosleep can specify sleep times
> using absolute time.

Thanks.

> > b) interfaces that don't make sense for times in the past:
> > - getitimer/setitimer
> > - timer_settime/timer_gettime
> > - gettimeofday/settimeofday
> > - adjtimex
> > - clock_gettime/clock_settime/clock_adjtime
> > - time/stime
> > - socket time stamps
> > - audio time stamps
> > - v4l time stamps
> > - input event time stamps
> > - sysv ipc (msg, sem, shm)
> >
> > Here, we are relatively free to change the start of the
> > epoch in the kernel but convert to something else on the
> > user space boundary. One possibility is to scale them to
> > boot time and use ktime_t in the kernel.
>
> I'm not sure I'm totally following this... Are you suggesting we keep
> 32bit time internally w/ some different offset but then pass to
> userland a 64bit time_t? Or are you suggesting we change the abi to
> move the epoch?

What I meant is that regardless of what we decide for the ABI,
we can change the in-kernel representation in any way we like as
long as we can represent all dates that can occur during the runtime
of the kernel, i.e. we don't have to represent times between 1970 and
2014. This could mean one of many representations:

- time_t scaled forward by 44 years and/or made unsigned
- ktime_t scaled to boot time
- 64-bit nanoseconds starting at the epoch
- timespec64

> I think I'm with hpa in his recent mail in that the internal
> representation is an optimization detail, and the bigger question is
> do we use a 64bit time_t for future systems (possibly w/ a major ABI
> break - with compat interface for existing 32bit applications), or do
> we try to rev interfaces function by function to provide 2038 safe
> versions which applications will have to be modified to use?
>
> Me, I'm a fan of moving time_t to 64bits, since it makes "porting"
> applications to a 2038 safe ABI easier.

I think there are two or three distinct problems:

a) We absolutely have to find a way to build a user space that
can survive 2038. This probably involves moving at least
time_t, timeval and timespec to use 64-bit representation.
b) We have to keep compatibility with existing user space running
on future kernels, which means at least x86, arm and a few
other 32-bit architectures (we can ignore some of the obsolete
ones if that helps us) need to provide syscall ABIs for both
32-bit time_t and whatever we use for the new syscalls and
ioctls. As Thomas said, for some interfaces this could mean
64-bit nanoseconds and for others it could be timespec64.
c) glibc may or may not provide a way for applications to use
the extended interfaces without a user space ABI break. My
impression so far is that this is going to be too hard and
it won't be done, but this is for the glibc developers to
determine.

The important distinction here is between user space time_t
(timeval, timespec) and __kernel_time_t. We probably need
to make the user space time_t a build-time conditional,
at least for the foreseeable future. New architectures or
new C libraries can start out using 64-bit time_t unconditionally.

For the kernel interface, I think we should deprecate any interfaces
using plain time_t and timeval, i.e. keep them around for existing
architectures (possibly with a kernel compile time option to disable
them so we are sure they don't leak out to new user space) and
provide kernel interfaces based on 64-bit timespec (or other
appropriate data structures for timestamps) for new architectures.

I see multiple ways of doing this, and I don't like any of them ;-)

1) rename all *time* types to *old_time*, and provide new ones
based on 64-bit time_t. We'd have to change them all at once,
and there would likely still be some build breakage with glibc.
The idea is that a libc built against old headers still works
fine on old and new kernels, and a libc built against new kernels
would automatically get 64-bit time but stop working on old
kernels. Also, any binaries built against old glibc wouldn't
work on new glibc, which is probably a killer.

Example:

-typedef long __kernel_time_t;
+typedef long __kernel_oldtime_t;
+typedef __s64 __kernel_time_t;
-struct timespec { __kernel_oldtime_t tv_sec; long tv_nsec; };
+struct oldtimespec { __kernel_oldtime_t tv_sec; long tv_nsec; };
+struct timespec { __s64 tv_sec; __s64 tv_nsec; };

-long sys_utime(char __user *filename, struct utimbuf __user *times);
-long sys_utimes(char __user *filename, struct timeval __user *utimes);
-long sys_futimesat(int dfd, const char __user *filename, struct timeval __user *utimes);
-long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);
+long sys_oldutime(char __user *filename, struct oldutimbuf __user *times);
+long sys_oldutimes(char __user *filename, struct oldtimeval __user *utimes);
+long sys_oldfutimesat(int dfd, const char __user *filename, struct oldtimeval __user *utimes);
+long sys_oldutimensat(int dfd, const char __user *filename, struct oldtimespec __user *utimes, int flags);

+long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);

-#define __NR_utimensat 88
-#define __NR_utimes 1037
-#define __NR_futimesat 1066
-#define __NR_utime 1063
+#define __NR_oldutimensat 88
+#define __NR_oldutimes 1037
+#define __NR_oldfutimesat 1066
+#define __NR_oldutime 1063

+#define __NR_utimensat 277 /* next free number for asm-generic/unistd.h */

2) leave the kernel time_t as 'long' and only introduce a new
struct timespec64,defined to be compatible with struct timespec on
64-bit architectures. For each syscall or ioctl that we need, come up
with a new one. Make the libc define its own time_t as 64-bit and use
the new syscalls instead of the old ones. This will allow a smooth
transition, but we might not be done with it before 2038.

Example:

typedef long __kernel_time_t;
struct timespec { __kernel_time_t tv_sec; long tv_nsec; };
+struct timespec64 { __s64 tv_sec; __s64 tv_nsec; };

+#ifdef __ARCH_WANT_32BIT_TIME
long sys_utime(char __user *filename, struct utimbuf __user *times);
long sys_utimes(char __user *filename, struct timeval __user *utimes);
long sys_futimesat(int dfd, const char __user *filename, struct timeval __user *utimes);
long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);
+#endif
+long sys_futimens64at(int dfd, const char __user *filename, struct timespec64 __user *utimes, int flags);


+#ifdef __ARCH_WANT_32BIT_TIME
#define __NR_utimensat 88
#define __NR_utimes 1037
#define __NR_futimesat 1066
#define __NR_utime 1063
+#endif

+#define __NR_futimens64at 277 /* next free number for asm-generic/unistd.h */

3) Make time_t 64-bit for new 32-bit architectures right away, and worry
about existing architectures separately. This will mean avoiding intentional
ABI changes for the new architectures later, at the cost of having fringe
architecture use an ABI that nobody else uses, likely more broken.

Example (as in the patch series under review):

#ifndef __kernel_time_t
#typedef __s64 __kernel_time_t
#endif

4) Allow combinations of the above approaches using #ifdef in the uabi
headers to let the libc decide at compile time which of the first two
it wants. At the binary level they are compatible. This is most flexible
but means we have to worry more about getting the corner cases right,
with code that is even harder to maintain.

Example:

#ifdef __libc_want_64bit_time
typedef long __kernel_oldtime_t;
typedef __s64 __kernel_time_t;
#else
typedef long __kernel_time_t;
typedef __s64 __kernel_time64_t;
#endif

#ifdef __libc_want_64bit_time
#define __NR_oldutimensat 88
#define __NR_futimensat 277
#else
#define __NR_utimensat 88
#define __NR_futimens64at 277
#endif

Arnd


\
 
 \ /
  Last update: 2014-05-15 14:01    [W:0.137 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site