Messages in this thread Patch in this message | | | From | Gregory CLEMENT <> | Subject | [PATCH v6 01/17] usb: ehci-orion: use platform_get_irq() for DT probing | Date | Thu, 15 May 2014 12:17:26 +0200 |
| |
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 77dae54ab385033e488d8b07045bc7f8d931740f ('ARM: Kirkwood: ehci-orion: Add device tree binding') added the Device Tree binding for the ehci-orion driver. To achieve that with the irq, it used the irq_of_parse_and_map() function when probed in DT-mode, and platform_get_irq() when probed in non-DT mode.
This is not necessary: platform_get_irq() works just as fine in DT-mode, since the conversion from DT information to 'struct resource' is done by the generic layers of the kernel.
Therefore, this commit switches back to use just platform_get_irq().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> --- drivers/usb/host/ehci-orion.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 30d35e5e503a..7728e83007a7 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -154,10 +154,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) pr_debug("Initializing Orion-SoC USB Host Controller\n"); - if (pdev->dev.of_node) - irq = irq_of_parse_and_map(pdev->dev.of_node, 0); - else - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", -- 1.8.1.2
| |