lkml.org 
[lkml]   [2014]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree
* Mugunthan V N <mugunthanvnm@ti.com> [140513 01:54]:
> Tony/Benoit
>
> On Tuesday 13 May 2014 01:34 PM, Mugunthan V N wrote:
> > Adding device tree entry for CPSW to make it work in Dual EMAC mode.
> >
> > DRA7 cpsw phy sel driver patch has been pulled in net-next git with the
> > following commit id *d415fa1b88748d664b7b6a310dd8e699d2686cf7*
> >
> > Mugunthan V N (3):
> > pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
> > arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx
> > arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM
> >
> > arch/arm/boot/dts/dra7-evm.dts | 103 ++++++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/dra7.dtsi | 59 ++++++++++++++++++++++
> > include/dt-bindings/pinctrl/dra.h | 8 +++
> > 3 files changed, 170 insertions(+)
> >
>
> This patch series depends on Cross bar dt patch set
> http://comments.gmane.org/gmane.linux.drivers.devicetree/73025

That's not enabled yet and sounds like it needs some more work.
I suggest you repost this tested without the crossbar.

Regards,

Tony


\
 
 \ /
  Last update: 2014-05-15 01:41    [W:0.065 / U:1.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site