lkml.org 
[lkml]   [2014]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
Date
Quoting Boris BREZILLON (2014-05-14 00:30:59)
> Hello Mike,
>
> On 14/05/2014 02:51, Mike Turquette wrote:
> > Quoting Boris BREZILLON (2014-05-09 04:11:49)
> >> +struct clk_ops ar100_ops = {
> >> + .recalc_rate = ar100_recalc_rate,
> >> + .determine_rate = ar100_determine_rate,
> >> + .set_parent = ar100_set_parent,
> >> + .get_parent = ar100_get_parent,
> >> + .set_rate = ar100_set_rate,
> >> +};
> > I might be having a brain fart, but is there a valid case for having
> > both a .recalc_rate and a .determine_rate? I believe that the former
> > will never be used and the latter will always be used by the clock
> > framework core.
>
> I think you're mistaking recalc_rate for round_rate.
> AFAIK, recalc_rate is mandatory for a clk that implement either
> round_rate or determine_rate.

I *was* having a brain fart. You're right of course. Too many .r*_rate()
callbacks...

Thanks,
Mike

>
>
> Best Regards,
>
> Boris
>
> --
> Boris Brezillon, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
>


\
 
 \ /
  Last update: 2014-05-15 01:21    [W:0.050 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site