lkml.org 
[lkml]   [2014]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH v2 3/7] phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
Hi,

On 05/12/2014 02:24 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Monday 12 May 2014 05:29 PM, Hans de Goede wrote:
>> Hi,
>>
>> On 05/12/2014 11:14 AM, Chen-Yu Tsai wrote:
>>> Hi,
>>>
>>> On Sat, May 10, 2014 at 8:56 PM, Maxime Ripard
>>> <maxime.ripard@free-electrons.com> wrote:
>>>> The USB phy controller in the A31 differs mostly from the older controllers
>>>> because it has a clock dedicated for each phy, while the older ones were having
>>>> a single clock for all the phys.
>>>>
>>>> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
>>>> ---
>>>> drivers/phy/phy-sun4i-usb.c | 35 ++++++++++++++++++++++++++---------
>>>> 1 file changed, 26 insertions(+), 9 deletions(-)
>>>>
>>>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>>>> index e6e6c4ba7145..8bd89430d945 100644
>>>> --- a/drivers/phy/phy-sun4i-usb.c
>>>> +++ b/drivers/phy/phy-sun4i-usb.c
>>>> @@ -61,7 +61,6 @@
>>>> #define MAX_PHYS 3
>>>>
>>>> struct sun4i_usb_phy_data {
>>>> - struct clk *clk;
>>>> void __iomem *base;
>>>> struct mutex mutex;
>>>> int num_phys;
>>>> @@ -71,6 +70,7 @@ struct sun4i_usb_phy_data {
>>>> void __iomem *pmu;
>>>> struct regulator *vbus;
>>>> struct reset_control *reset;
>>>> + struct clk *clk;
>>>> int index;
>>>> } phys[MAX_PHYS];
>>>> };
>>>> @@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>>>> struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>>>> int ret;
>>>>
>>>> - ret = clk_prepare_enable(data->clk);
>>>> + ret = clk_prepare_enable(phy->clk);
>>>> if (ret)
>>>> return ret;
>>>>
>>>> ret = reset_control_deassert(phy->reset);
>>>> if (ret) {
>>>> - clk_disable_unprepare(data->clk);
>>>> + clk_disable_unprepare(phy->clk);
>>>> return ret;
>>>> }
>>>>
>>>> @@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>>>> static int sun4i_usb_phy_exit(struct phy *_phy)
>>>> {
>>>> struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
>>>> - struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>>>>
>>>> sun4i_usb_phy_passby(phy, 0);
>>>> reset_control_assert(phy->reset);
>>>> - clk_disable_unprepare(data->clk);
>>>> + clk_disable_unprepare(phy->clk);
>>>>
>>>> return 0;
>>>> }
>>>> @@ -228,8 +227,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>>>> struct phy_provider *phy_provider;
>>>> struct reset_control *reset;
>>>> struct regulator *vbus;
>>>> + bool dedicated_clocks;
>>>
>>> No default?
>>>
>>>> struct resource *res;
>>>> struct phy *phy;
>>>> + struct clk *clk;
>>>> char name[16];
>>>> int i;
>>>>
>>>> @@ -249,15 +250,20 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>>>> else
>>>> data->disc_thresh = 2;
>>>>
>>>> + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
>>>> + dedicated_clocks = true;
>>>> +
>>>
>>> dedicated_clocks is more than likely to be true from leftover data
>>> on the stack. This results in the usb phy driver probe failing, and
>>> the usb host drivers left in perpetual probe deferral on my Cubietruck.
>>>
>>> Adding an else section fixes this.
>>
>> Good catch, fixed this in the sunxi-devel branch for now (until Maxime sends a new version).
>
> so I wont be taking this patch in my tree. Anyway FWIW
> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

To be clear, the sunxi-devel branch is a testing branch where I collect all the
pending sunxi related patches, it is not a way for patches to go upstream.

I don't know what the exact upstreaming plan for this patch-set is,
but logically this patch (once a fixed version is resend) should be going
upstream through you.

Regards,

Hans


\
 
 \ /
  Last update: 2014-05-12 14:41    [W:0.078 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site