Messages in this thread | | | Date | Mon, 12 May 2014 11:06:07 +0200 | From | Nicolas Ferre <> | Subject | Re: [PATCH 1/2] ARM: at91: add PWM pinctrl to SAMA5D3 |
| |
On 10/05/2014 11:10, Alexandre Belloni : > Hi Nicolas, > > On 09/05/2014 at 15:44:27 +0200, Nicolas Ferre wrote : >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> --- >> arch/arm/boot/dts/sama5d3.dtsi | 82 ++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 82 insertions(+) >> >> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi >> index 9caa06b3641e..ed7943745f23 100644 >> --- a/arch/arm/boot/dts/sama5d3.dtsi >> +++ b/arch/arm/boot/dts/sama5d3.dtsi >> @@ -583,6 +583,88 @@ >> }; >> }; >> >> + pwm0 { >> + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { >> + atmel,pins = >> + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA20 periph B, conflicts with ISI_D4 and LCDDAT20 */ > > Didn't we decide at some point to stop adding comments for the pinctrl ? > At least, I would say that "PA20 periph B" doesn't add any useful > information.
Yes, we said that for the description and you are right saying that saying again the pin configuration doesn't make sense. On the other hand, I tend to like the "conflicts with ..." part of it (and it is automatically generated).
So, should we keep this part?
>> + }; >> + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { >> + atmel,pins = >> + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B, conflicts with GTX0 */ >> + }; >> + >> + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { >> + atmel,pins = >> + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA22 periph B, conflicts with ISI_D6 and LCDDAT22 */ >> + }; >> + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { >> + atmel,pins = >> + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB4 periph B, conflicts with GRX0 */ >> + }; >> + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { >> + atmel,pins = >> + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PB27 periph C, conflicts with G125CKO and RTS1 */ >> + }; >> + >> + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { >> + atmel,pins = >> + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB8 periph B, conflicts with GTXCK */ >> + }; >> + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { >> + atmel,pins = >> + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD5 periph C, conflicts with MCI0_DA4 and TIOA0 */ >> + }; >> + >> + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { >> + atmel,pins = >> + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB12 periph B, conflicts with GRXDV */ >> + }; >> + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { >> + atmel,pins = >> + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD7 periph C, conflicts with MCI0_DA6 and TCLK0 */ >> + }; >> + >> + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { >> + atmel,pins = >> + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA21 periph B, conflicts with ISI_D5 and LCDDAT21 */ >> + }; >> + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { >> + atmel,pins = >> + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B, conflicts with GTX1 */ >> + }; > > I would group pwm0_pwmhx and pwm0_pwmlx together.
Ah, ok, I can do this, sure.
> >> + >> + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { >> + atmel,pins = >> + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B, conflicts with ISI_D7 and LCDDAT23 */ >> + }; >> + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { >> + atmel,pins = >> + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B, conflicts with GRX1 */ >> + }; >> + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { >> + atmel,pins = >> + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE31 periph B, conflicts with IRQ */ >> + }; >> + >
-- Nicolas Ferre
| |