lkml.org 
[lkml]   [2014]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arc_emac: implement promiscuous mode and multicast filtering
Date
This patch implements the set_rx_mode function to enable/disable
promiscuous or all-multicast modes and to update the multicast
filtering list of the device.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
---
drivers/net/ethernet/arc/emac_main.c | 37 ++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 9f45782..12fc810 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -13,6 +13,7 @@
* Vineet Gupta
*/

+#include <linux/crc32.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -451,6 +452,41 @@ static int arc_emac_open(struct net_device *ndev)
}

/**
+ * arc_emac_set_rx_mode - Change the receive filtering mode.
+ * @ndev: Pointer to the network device.
+ *
+ * This function enables/disables promiscuous or all-multicast mode
+ * and updates the multicast filtering list of the network device.
+ */
+static void arc_emac_set_rx_mode(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+
+ if (ndev->flags & IFF_PROMISC) {
+ arc_reg_or(priv, R_CTRL, PROM_MASK);
+ } else {
+ arc_reg_clr(priv, R_CTRL, PROM_MASK);
+
+ if (ndev->flags & IFF_ALLMULTI) {
+ arc_reg_set(priv, R_LAFL, ~0);
+ arc_reg_set(priv, R_LAFH, ~0);
+ } else {
+ struct netdev_hw_addr *ha;
+ unsigned int filter[2] = { 0, 0 };
+ int bit;
+
+ netdev_for_each_mc_addr(ha, ndev) {
+ bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
+ filter[bit >> 5] |= 1 << (bit & 31);
+ }
+
+ arc_reg_set(priv, R_LAFL, filter[0]);
+ arc_reg_set(priv, R_LAFH, filter[1]);
+ }
+ }
+}
+
+/**
* arc_emac_stop - Close the network device.
* @ndev: Pointer to the network device.
*
@@ -620,6 +656,7 @@ static const struct net_device_ops arc_emac_netdev_ops = {
.ndo_start_xmit = arc_emac_tx,
.ndo_set_mac_address = arc_emac_set_address,
.ndo_get_stats = arc_emac_stats,
+ .ndo_set_rx_mode = arc_emac_set_rx_mode,
};

static int arc_emac_probe(struct platform_device *pdev)
--
1.7.10.4


\
 
 \ /
  Last update: 2014-05-11 18:41    [W:0.039 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site