lkml.org 
[lkml]   [2014]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] earlyprintk=efi,keep fix
On 05/01/14 at 11:12am, Matt Fleming wrote:
> On Wed, 30 Apr, at 10:13:03AM, Dave Young wrote:
> >
> > earlyprintk=efi,keep will cause kernel hangs while freeing initmem like below:
> > [ 2.826089] VFS: Mounted root (ext4 filesystem) readonly on device 254:2.
> > [ 2.846592] devtmpfs: mounted
> > [ 2.856974] Freeing unused kernel memory: 880K (ffffffff817d4000 - ffffffff818b0000)
> >
> > It is caused by efi earlyprintk use __init function which will be freed later.
> > Such as early_efi_write is marked as __init, also it will use early_ioremap
> > which is init function as well.
> >
> > To fix this issue, I added one early initcall efi_ioremap_fb which will map the whole
> > efi fb for later use. OTOH, adding a wrapper function efi_ioremap which will call
> > early_ioremap before ioremap is available.
> >
> > With this patch applied efi boot ok with earlyprintk=efi,keep console=efi
> >
> > Signed-off-by: Dave Young <dyoung@redhat.com>
> > ---
> > arch/x86/platform/efi/early_printk.c | 54 +++++++++++++++++++++++++++--------
> > 1 file changed, 42 insertions(+), 12 deletions(-)
>
> Thanks Dave, good catch. I've got a few comments below.
>
> > +static __init int efi_ioremap_fb(void)
> > +{
> > + unsigned long base, size;
> > +
> > + base = boot_params.screen_info.lfb_base;
> > + size = boot_params.screen_info.lfb_size;
> > + efi_fb = ioremap(base, size);
> > +
> > + return efi_fb ? 0 : -ENOMEM;
> > +}
> > +early_initcall(efi_ioremap_fb);
>
> So, here you're actually ioremap'ing the framebuffer irrespective of
> whether anyone passed earlyprintk=efi,keep on the command line.
> Furthermore, you'll perform the ioremap() even if some error was
> encountered in early_efi_setup().
>
> You need a way to figure out whether the ioremap() is actually needed.
>
> Please document this function to explain why we need to ioremap() the
> framebuffer from an early_initcall().
>
> Oh and as a side note, please prefix functions in this file with
> early_efi_*. Yeah, I realise that I suggested efi_ioremap() as a name -
> my bad.
>
> > +static __init_refok void *efi_ioremap(unsigned long start, unsigned long len)
> > +{
> > + unsigned long base;
> > +
> > + base = boot_params.screen_info.lfb_base;
> > + if (efi_fb)
> > + return (efi_fb + start - base);
> > + else
> > + return early_ioremap(start, len);
> > +}
>
> Adding .lfb_base in the caller and then subtracting here seems
> needlessly complicated. Instead I'd suggest making early_efi_map() take
> an offset and a length, and document when each framebuffer is used.

Matt, thanks for the comments. I have sent out an update patch which addressed
the comments except the last one "and document when each framebuffer is used"
I added comment before function early_efi_map, not sure if it's what you want.

Thanks
Dave


\
 
 \ /
  Last update: 2014-05-01 15:41    [W:0.053 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site