lkml.org 
[lkml]   [2014]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] pwm: add period and polarity to struct pwm_lookup
On 09/04/2014 at 20:37:06 +0100, Russell King - ARM Linux wrote :
> On Wed, Apr 09, 2014 at 08:04:08PM +0200, Alexandre Belloni wrote:
> > Adds a period and a polarity member to struct pwm_lookup so that when performing
> > a lookup using the lookup table instead of device tree, we are able to set the
> > period and the polarity accordingly like what is done in
> > of_pwm_xlate_with_flags.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> > drivers/pwm/core.c | 5 +++++
> > include/linux/pwm.h | 2 ++
> > 2 files changed, 7 insertions(+)
> >
> > diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
> > index a80471399c20..206e5996359c 100644
> > --- a/drivers/pwm/core.c
> > +++ b/drivers/pwm/core.c
> > @@ -663,6 +663,11 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
> >
> > if (chip)
> > pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
> > + if (IS_ERR(pwm))
> > + return pwm;
> > +
> > + pwm_set_period(pwm, p->period);
> > + pwm_set_polarity(pwm, p->polarity);
> >
> > mutex_unlock(&pwm_lookup_lock);
>
> Clearly, this is not right. Returning while leaving the mutex locked?
> No.
>

Sure, I will fix that crap, sorry about that and thanks for pointing it
out.

> The second issue is... with _just_ this patch applied, we end up with
> "period" and "polarity" presumably initialised to zero, which means we
> now end up with the above explicitly setting the period and polarity as
> such. Isn't that going to change the behaviour of this?
>

I actually checked that.

For the polarity, for now, it is assumed that it is normal unless
specified otherwise.
The only driver that was supporting inverting it using platform_data is
pwm-renesas-tpu. It is used by board-armadillo800eva.c that I am
modifying now (and I just now realise that I forgot to invert it).

The only PWM controller that I know of that by default has its polarity
inversed is the allwinner one and in the driver I submitted, I actually
switch it to normal polarity in the probe instead of e.g. doing
pwm->polarity = PWM_POLARITY_INVERSED;

For the period, all the driver are assuming 0 after initialization.

I think this is not specified. If you think that may be a concern then I
suggest creating another macro and using a bitfield to know which value
is set.

I would also argue that when using device tree,
of_pwm_xlate_with_flags() will set the period and the polarity
unconditionally, this is replicating that behaviour.

However, I could agree that we may need to test for
pwm->chip->ops->set_polarity before calling pwm_set_polarity as we will
get an error if it is NULL (but we actually discard that return value).

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-04-09 23:21    [W:0.041 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site