lkml.org 
[lkml]   [2014]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: driver skip pci_set_master, fix it? No.
On Wed, Apr 9, 2014 at 10:40 AM, Mark Lord <mlord@pobox.com> wrote:
> On 14-04-09 11:52 AM, Bjorn Helgaas wrote:
>> On Wed, Apr 9, 2014 at 8:18 AM, Mark Lord <mlord@pobox.com> wrote:
>>> On 14-04-09 10:12 AM, Mark Lord wrote:
>>>> On 14-04-09 09:08 AM, Mark Lord wrote:
>>>>> On 14-04-08 10:51 PM, Benjamin Herrenschmidt wrote:
>>>>>> On Tue, 2014-04-08 at 17:18 -0400, Mark Lord wrote:
>>>>>>>> I assume you're talking about the one added by cf3e1feba7f9 ("PCI:
>>>>>>>> Workaround missing pci_set_master in pci drivers"), but as far as I
>>>>>>>> can tell, it only calls pci_set_master() for *bridge* devices. What
>>>>>>>> am I missing? Is pci_set_master() being called for your endpoint?
>>>>>>>> What path is that?
>>>>>>>
>>>>>>> Yes, it is being called during execution of the _probe() function in my driver,
>>>>>>> as evidenced by the annoying (and wrong) message it produces.
>>>>>>>
>>>>>>> Next time I've got the hardware at hand, I'll put a "dump_stack()" into there
>>>>>>> to see the exact calling path.
>>>>>>
>>>>>> Note that one of the reason we want to do it early on bridges is that without it,
>>>>>> we may also not get the PCIe error messages.
>>>>>
>>>>> Sure, for bridges.
>>>>>
>>>>> I'll get a stack trace later today, but what I suspect is happening
>>>>> is that this multi-function card is being treated by the PCI layers
>>>>> as a "bridge" for purposes of the multiple virtual functions it implements.
>>>>>
>>>>> We will probably need to distinguish this kind of device from real bridges here.
>>>>
>>>> Here's the call trace, all the way back to k7_probe(),
>>>> the driver's PCI "probe" function, and beyond:
>>>>
>>>> [ 30.481454] k7: loading driver version 0.80
>>>> [ 30.485561] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
>>
>> This message says we're enabling bus mastering for a PCIe Root Port,
>> which I think is the expected behavior and shouldn't cause trouble for
>> your device (correct me if I'm wrong).
>>
>> I don't know the system topology, but I'm guessing the k7 device is
>> below that Root Port. We might be enabling bus mastering for the k7
>> device, too, but that's not what this message is about, and we'd have
>> to look at the k7 command register to know for sure whether we did
>> anything to it.
>>
>>>> [ 30.485580] CPU: 2 PID: 4401 Comm: insmod Tainted: G O 3.12.14 #3
>>>> [ 30.485583] Hardware name: Supermicro X9SCI/X9SCA/X9SCI/X9SCA, BIOS 2.0b 09/17/2012
>>>> [ 30.485590] 0000000000000300 ffff88041c11b9b8 ffffffff8156c40b 0000000000000000
>>>> [ 30.485598] ffff88041d2b7000 ffff88041c11b9d8 ffffffff812dc493 0000000000000300
>>>> [ 30.485603] ffff88041d399000 ffff88041c11ba08 ffffffff812dc50d 0000000000001000
>>>> [ 30.485607] Call Trace:
>>>> [ 30.485616] [<ffffffff8156c40b>] dump_stack+0x4f/0x84
>>>> [ 30.485622] [<ffffffff812dc493>] pci_enable_bridge+0x93/0xa0
>>>> [ 30.485627] [<ffffffff812dc50d>] pci_enable_device_flags+0x6d/0xe0
>>>> [ 30.485631] [<ffffffff812dc58e>] pci_enable_device+0xe/0x10
>>>> [ 30.485641] [<ffffffffa0469c0d>] k7_enable_device+0x3d/0xa30 [k7]
>>>> [ 30.485649] [<ffffffffa0462d72>] ? k7_devmem_alloc+0x32/0x140 [k7]
>>>> [ 30.485654] [<ffffffff81572ab6>] ? _raw_spin_lock+0x16/0x40
>>>> [ 30.485658] [<ffffffff81572721>] ? _raw_spin_unlock+0x11/0x40
>>>> [ 30.485666] [<ffffffffa046aee8>] k7_probe+0x458/0x630 [k7]
> ...
>>> The e1000e network driver is suffering from this as well in 3.12.14.
>>
>> I'll look at this more closely, in 3.12.14 in particular (I was
>> looking at 3.14 before). Can you collect "lspci -vv" output for one
>> or both of these systems (the whole system, not just the device in
>> question)?
>>
>> Maybe you could read the PCI command register after the
>> pci_enable_device() and verify that bus mastering is actually being
>> enabled when you didn't expect it?
>
> I've checked the master bit now in my own driver,
> and you are right -- it is still 0 after pci_enable_device().
>
> So that message is complaining about the root port driver,
> not my driver or the e1000e driver. Confusing at first.
>
> Whoever added the message ought to have taken care of the
> root ports already. So a fix may still be needed for that.

Definitely confusing. That message has already been removed by
fbeeb822f6f4 ("PCI: Drop warning about drivers that don't use
pci_set_master()"). I'm sorry it wasn't removed soon enough to save
you the confusion :)

So I think your concern is resolved. Let me know if it's not and I'll
look into it more.

Thanks,
Bjorn


\
 
 \ /
  Last update: 2014-04-09 21:01    [W:0.036 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site