lkml.org 
[lkml]   [2014]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 08/16] backlight: pwm_bl: set pwm polarity when using platform data
On Wed, Mar 19, 2014 at 02:03:21PM +0100, Alexandre Belloni wrote:
> Set inversed polarity when .pwm_active_low is set in the platform_data. With
> device tree, this is taken care of by of_pwm_xlate_with_flags(), called from
> of_pwm_get().
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> drivers/video/backlight/pwm_bl.c | 8 ++++++++
> include/linux/pwm_backlight.h | 1 +
> 2 files changed, 9 insertions(+)
>
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index b75201ff46f6..ffdd3b2b2742 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -309,6 +309,14 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> if (data->pwm_period_ns > 0)
> pwm_set_period(pb->pwm, data->pwm_period_ns);
>
> + /*
> + * The DT case is taking care of polarity in of_pwm_get(). For the
> + * non-DT case, set the polarity from platform data.
> + */
> + if (data->pwm_active_low)
> + if (pwm_set_polarity(pb->pwm, PWM_POLARITY_INVERSED))
> + dev_err(&pdev->dev, "impossible to invert polarity\n");

Could this perhaps be solved by adding a field to the PWM lookup table
that's used for non-DT cases? The idea being that we can use the same
interfaces for DT and non-DT cases, so we should try to move both
towards the same representation.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-04-07 14:01    [W:0.123 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site