lkml.org 
[lkml]   [2014]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] MIPS/loongson2_cpufreq: fix CPU clock rate setting
From
On 3 April 2014 00:37, Aaro Koskinen <aaro.koskinen@iki.fi> wrote:
> Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
> been unnoticed, as loongson2_cpufreq was the only place where the rate
> was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
> (cpufreq: introduce cpufreq_generic_get() routine) things however broke,
> and now loops_per_jiffy adjustments are incorrect (1000 times too long).
> The patch fixes this by changing cpu_clk rate to Hz.
>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> Cc: stable@vger.kernel.org
> ---
> arch/mips/loongson/lemote-2f/clock.c | 7 +++++--
> drivers/cpufreq/loongson2_cpufreq.c | 4 ++--
> 2 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c
> index aed32b8..699f388 100644
> --- a/arch/mips/loongson/lemote-2f/clock.c
> +++ b/arch/mips/loongson/lemote-2f/clock.c
> @@ -91,6 +91,7 @@ EXPORT_SYMBOL(clk_put);
>
> int clk_set_rate(struct clk *clk, unsigned long rate)
> {
> + unsigned int rate_khz;

Initialize rate_khz here only instead of doing it separately..

> int ret = 0;
> int regval;
> int i;
> @@ -106,15 +107,17 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
> if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
> propagate_rate(clk);
>
> + rate_khz = rate / 1000;
> +

From here:

> for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END;
> i++) {
> if (loongson2_clockmod_table[i].frequency ==
> CPUFREQ_ENTRY_INVALID)
> continue;
> - if (rate == loongson2_clockmod_table[i].frequency)
> + if (rate_khz == loongson2_clockmod_table[i].frequency)
> break;
> }
> - if (rate != loongson2_clockmod_table[i].frequency)
> + if (rate_khz != loongson2_clockmod_table[i].frequency)
> return -ENOTSUPP;

To here:

All this code is junk and not required anymore as rate is guaranteed
to be in loongson2_clockmod_table[].. Probably you need value of
'i' here and you can pass that directly from loongson2_cpufreq_target().


\
 
 \ /
  Last update: 2014-04-03 07:46    [W:0.070 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site