lkml.org 
[lkml]   [2014]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/6] Add CPTS support for AM437x
    Date
    The series adds CPTS support for AM4372.

    Patch 1 - CPTS clock name harcoding in the driver is removed.
    Easier to pass the clock name from dt rather than hardcoding in driver.
    Also in prepration for DRA7x CPTS support.
    Patch 2 - DT changes w.r.t clock changes for AM33xx.
    Patch 3 - Enable the CPTS support for both DRA7x and AM4372 in the driver.
    Patch 4 - Enable the Annexe F for L2 PTP for AM437x and DRA7x.
    Patch 5 - Change the default clocksource to dpll_core_m5
    Patch 6 - DT changes for AM4372.

    George Cherian (6):
    drivers: net: cpts: Remove hardcoded clock name for CPTS
    ARM: dts: am33xx: Add clock names for cpsw and cpts
    drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372
    drivers: net: cpsw: Enable Annexe F Time sync
    ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk
    ARM: dts: am4372: Add clock names for cpsw and cpts

    arch/arm/boot/dts/am33xx.dtsi | 2 ++
    arch/arm/boot/dts/am4372.dtsi | 2 ++
    drivers/clk/ti/clk-43xx.c | 16 ++++++++++++++++
    drivers/net/ethernet/ti/cpsw.c | 15 ++++++++++-----
    drivers/net/ethernet/ti/cpts.c | 11 ++++-------
    5 files changed, 34 insertions(+), 12 deletions(-)

    --
    1.8.3.1



    \
     
     \ /
      Last update: 2014-04-28 07:41    [W:9.690 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site