lkml.org 
[lkml]   [2014]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 08/12] scsi/NCR5380: adopt dprintk()
Acked-by: Michael Schmitz <schmitz@debian.org>

> All NCR5380 drivers already include the NCR5380.h header. Better to
> adopt those macros rather than have three variations on them.
>
> Moreover, the macros in NCR5380.h are preferable because the atari_NCR5380
> and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
> dprintk(NDEBUG_MAIN | NDEBUG_QUEUES, ...)
>
> Replace the *_PRINTK macros from atari_NCR5380.h and sun3_NCR5380.h with
> the equivalent macros from NCR5380.h.
>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
>
> ---
> drivers/scsi/atari_NCR5380.c | 130 +++++++++++++++++++++----------------------
> drivers/scsi/atari_scsi.c | 16 ++---
> drivers/scsi/sun3_NCR5380.c | 122 ++++++++++++++++++++--------------------
> 3 files changed, 134 insertions(+), 134 deletions(-)
>
> Index: linux-m68k/drivers/scsi/atari_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/atari_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> +++ linux-m68k/drivers/scsi/atari_NCR5380.c 2014-03-19 23:34:44.000000000 +1100
> @@ -370,7 +370,7 @@ static int is_lun_busy(Scsi_Cmnd *cmd, i
> return 0;
> if (TagAlloc[cmd->device->id][cmd->device->lun].nr_allocated >=
> TagAlloc[cmd->device->id][cmd->device->lun].queue_size) {
> - TAG_PRINTK("scsi%d: target %d lun %d: no free tags\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
> H_NO(cmd), cmd->device->id, cmd->device->lun);
> return 1;
> }
> @@ -394,7 +394,7 @@ static void cmd_get_tag(Scsi_Cmnd *cmd,
> !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
> cmd->tag = TAG_NONE;
> hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
> - TAG_PRINTK("scsi%d: target %d lun %d now allocated by untagged "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
> "command\n", H_NO(cmd), cmd->device->id, cmd->device->lun);
> } else {
> TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
> @@ -402,7 +402,7 @@ static void cmd_get_tag(Scsi_Cmnd *cmd,
> cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
> set_bit(cmd->tag, ta->allocated);
> ta->nr_allocated++;
> - TAG_PRINTK("scsi%d: using tag %d for target %d lun %d "
> + dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d "
> "(now %d tags in use)\n",
> H_NO(cmd), cmd->tag, cmd->device->id,
> cmd->device->lun, ta->nr_allocated);
> @@ -420,7 +420,7 @@ static void cmd_free_tag(Scsi_Cmnd *cmd)
>
> if (cmd->tag == TAG_NONE) {
> hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
> - TAG_PRINTK("scsi%d: target %d lun %d untagged cmd finished\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n",
> H_NO(cmd), cmd->device->id, cmd->device->lun);
> } else if (cmd->tag >= MAX_TAGS) {
> printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
> @@ -429,7 +429,7 @@ static void cmd_free_tag(Scsi_Cmnd *cmd)
> TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
> clear_bit(cmd->tag, ta->allocated);
> ta->nr_allocated--;
> - TAG_PRINTK("scsi%d: freed tag %d for target %d lun %d\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
> H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun);
> }
> }
> @@ -478,7 +478,7 @@ static void merge_contiguous_buffers(Scs
> for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1;
> cmd->SCp.buffers_residual &&
> virt_to_phys(sg_virt(&cmd->SCp.buffer[1])) == endaddr;) {
> - MER_PRINTK("VTOP(%p) == %08lx -> merging\n",
> + dprintk(NDEBUG_MERGING, "VTOP(%p) == %08lx -> merging\n",
> page_address(sg_page(&cmd->SCp.buffer[1])), endaddr);
> #if (NDEBUG & NDEBUG_MERGING)
> ++cnt;
> @@ -490,7 +490,7 @@ static void merge_contiguous_buffers(Scs
> }
> #if (NDEBUG & NDEBUG_MERGING)
> if (oldlen != cmd->SCp.this_residual)
> - MER_PRINTK("merged %d buffers from %p, new length %08x\n",
> + dprintk(NDEBUG_MERGING, "merged %d buffers from %p, new length %08x\n",
> cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
> #endif
> }
> @@ -676,7 +676,7 @@ static inline void NCR5380_all_init(void
> {
> static int done = 0;
> if (!done) {
> - INI_PRINTK("scsi : NCR5380_all_init()\n");
> + dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n");
> done = 1;
> }
> }
> @@ -984,7 +984,7 @@ static int NCR5380_queue_command_lck(Scs
> }
> local_irq_restore(flags);
>
> - QU_PRINTK("scsi%d: command added to %s of queue\n", H_NO(cmd),
> + dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
> (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
>
> /* If queue_command() is called from an interrupt (real one or bottom
> @@ -1054,7 +1054,7 @@ static void NCR5380_main(struct work_str
> done = 1;
>
> if (!hostdata->connected) {
> - MAIN_PRINTK("scsi%d: not connected\n", HOSTNO);
> + dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO);
> /*
> * Search through the issue_queue for a command destined
> * for a target that's not busy.
> @@ -1107,7 +1107,7 @@ static void NCR5380_main(struct work_str
> * On failure, we must add the command back to the
> * issue queue so we can keep trying.
> */
> - MAIN_PRINTK("scsi%d: main(): command for target %d "
> + dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d "
> "lun %d removed from issue_queue\n",
> HOSTNO, tmp->device->id, tmp->device->lun);
> /*
> @@ -1140,7 +1140,7 @@ static void NCR5380_main(struct work_str
> #endif
> falcon_dont_release--;
> local_irq_restore(flags);
> - MAIN_PRINTK("scsi%d: main(): select() failed, "
> + dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
> "returned to issue_queue\n", HOSTNO);
> if (hostdata->connected)
> break;
> @@ -1155,10 +1155,10 @@ static void NCR5380_main(struct work_str
> #endif
> ) {
> local_irq_restore(flags);
> - MAIN_PRINTK("scsi%d: main: performing information transfer\n",
> + dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
> HOSTNO);
> NCR5380_information_transfer(instance);
> - MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO);
> + dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
> done = 0;
> }
> } while (!done);
> @@ -1204,12 +1204,12 @@ static void NCR5380_dma_complete(struct
> (BASR_PHASE_MATCH|BASR_ACK)) {
> saved_data = NCR5380_read(INPUT_DATA_REG);
> overrun = 1;
> - DMA_PRINTK("scsi%d: read overrun handled\n", HOSTNO);
> + dprintk(NDEBUG_DMA, "scsi%d: read overrun handled\n", HOSTNO);
> }
> }
> }
>
> - DMA_PRINTK("scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
> + dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
> HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
> NCR5380_read(STATUS_REG));
>
> @@ -1229,13 +1229,13 @@ static void NCR5380_dma_complete(struct
> if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
> cnt = toPIO = atari_read_overruns;
> if (overrun) {
> - DMA_PRINTK("Got an input overrun, using saved byte\n");
> + dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
> *(*data)++ = saved_data;
> (*count)--;
> cnt--;
> toPIO--;
> }
> - DMA_PRINTK("Doing %d-byte PIO to 0x%08lx\n", cnt, (long)*data);
> + dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%08lx\n", cnt, (long)*data);
> NCR5380_transfer_pio(instance, &p, &cnt, data);
> *count -= toPIO - cnt;
> }
> @@ -1261,25 +1261,25 @@ static irqreturn_t NCR5380_intr(int irq,
> int done = 1, handled = 0;
> unsigned char basr;
>
> - INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO);
>
> /* Look for pending interrupts */
> basr = NCR5380_read(BUS_AND_STATUS_REG);
> - INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> + dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> ENABLE_IRQ();
> - INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
> NCR5380_reselect(instance);
> (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> } else if (basr & BASR_PARITY_ERROR) {
> - INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO);
> (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
> - INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO);
> (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> } else {
> /*
> @@ -1298,7 +1298,7 @@ static irqreturn_t NCR5380_intr(int irq,
> ((basr & BASR_END_DMA_TRANSFER) ||
> !(basr & BASR_PHASE_MATCH))) {
>
> - INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
> NCR5380_dma_complete( instance );
> done = 0;
> ENABLE_IRQ();
> @@ -1323,7 +1323,7 @@ static irqreturn_t NCR5380_intr(int irq,
> }
>
> if (!done) {
> - INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
> /* Put a call to NCR5380_main() on the queue... */
> queue_main();
> }
> @@ -1397,7 +1397,7 @@ static int NCR5380_select(struct Scsi_Ho
>
> hostdata->restart_select = 0;
> NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> - ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> /*
> @@ -1442,7 +1442,7 @@ static int NCR5380_select(struct Scsi_Ho
> ;
> #endif
>
> - ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO);
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
>
> if (hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> @@ -1463,7 +1463,7 @@ static int NCR5380_select(struct Scsi_Ho
> (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
> hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> - ARB_PRINTK("scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
> HOSTNO);
> return -1;
> }
> @@ -1478,7 +1478,7 @@ static int NCR5380_select(struct Scsi_Ho
> hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> - ARB_PRINTK("scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
> HOSTNO);
> return -1;
> }
> @@ -1501,7 +1501,7 @@ static int NCR5380_select(struct Scsi_Ho
> return -1;
> }
>
> - ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO);
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
>
> /*
> * Now that we have won arbitration, start Selection process, asserting
> @@ -1561,7 +1561,7 @@ static int NCR5380_select(struct Scsi_Ho
>
> udelay(1);
>
> - SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
> + dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
>
> /*
> * The SCSI specification calls for a 250 ms timeout for the actual
> @@ -1630,7 +1630,7 @@ static int NCR5380_select(struct Scsi_Ho
> #endif
> cmd->scsi_done(cmd);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> - SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO);
> + dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return 0;
> }
> @@ -1656,7 +1656,7 @@ static int NCR5380_select(struct Scsi_Ho
> while (!(NCR5380_read(STATUS_REG) & SR_REQ))
> ;
>
> - SEL_PRINTK("scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
> + dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
> HOSTNO, cmd->device->id);
> tmp[0] = IDENTIFY(1, cmd->device->lun);
>
> @@ -1676,7 +1676,7 @@ static int NCR5380_select(struct Scsi_Ho
> data = tmp;
> phase = PHASE_MSGOUT;
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO);
> + dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
> /* XXX need to handle errors here */
> hostdata->connected = cmd;
> #ifndef SUPPORT_TAGS
> @@ -1737,11 +1737,11 @@ static int NCR5380_transfer_pio(struct S
> while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
> ;
>
> - HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO);
> + dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
>
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> - PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> + dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
> NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
> @@ -1782,7 +1782,7 @@ static int NCR5380_transfer_pio(struct S
> while (NCR5380_read(STATUS_REG) & SR_REQ)
> ;
>
> - HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO);
> + dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
>
> /*
> * We have several special cases to consider during REQ/ACK handshaking :
> @@ -1803,7 +1803,7 @@ static int NCR5380_transfer_pio(struct S
> }
> } while (--c);
>
> - PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c);
> + dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
>
> *count = c;
> *data = d;
> @@ -1917,7 +1917,7 @@ static int NCR5380_transfer_dma(struct S
> if (atari_read_overruns && (p & SR_IO))
> c -= atari_read_overruns;
>
> - DMA_PRINTK("scsi%d: initializing DMA for %s, %d bytes %s %p\n",
> + dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
> HOSTNO, (p & SR_IO) ? "reading" : "writing",
> c, (p & SR_IO) ? "to" : "from", d);
>
> @@ -2039,7 +2039,7 @@ static void NCR5380_information_transfer
> * they are at contiguous physical addresses.
> */
> merge_contiguous_buffers(cmd);
> - INF_PRINTK("scsi%d: %d bytes and %d buffers left\n",
> + dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
> HOSTNO, cmd->SCp.this_residual,
> cmd->SCp.buffers_residual);
> }
> @@ -2123,7 +2123,7 @@ static void NCR5380_information_transfer
> /* Accept message by clearing ACK */
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
> - LNK_PRINTK("scsi%d: target %d lun %d linked command "
> + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked command "
> "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
>
> /* Enable reselect interrupts */
> @@ -2148,7 +2148,7 @@ static void NCR5380_information_transfer
> * and don't free it! */
> cmd->next_link->tag = cmd->tag;
> cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
> - LNK_PRINTK("scsi%d: target %d lun %d linked request "
> + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked request "
> "done, calling scsi_done().\n",
> HOSTNO, cmd->device->id, cmd->device->lun);
> #ifdef NCR5380_STATS
> @@ -2165,7 +2165,7 @@ static void NCR5380_information_transfer
> /* ++guenther: possible race with Falcon locking */
> falcon_dont_release++;
> hostdata->connected = NULL;
> - QU_PRINTK("scsi%d: command for target %d, lun %d "
> + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %d "
> "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
> #ifdef SUPPORT_TAGS
> cmd_free_tag(cmd);
> @@ -2179,7 +2179,7 @@ static void NCR5380_information_transfer
> /* ++Andreas: the mid level code knows about
> QUEUE_FULL now. */
> TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
> - TAG_PRINTK("scsi%d: target %d lun %d returned "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d returned "
> "QUEUE_FULL after %d commands\n",
> HOSTNO, cmd->device->id, cmd->device->lun,
> ta->nr_allocated);
> @@ -2224,14 +2224,14 @@ static void NCR5380_information_transfer
> (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
> scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
>
> - ASEN_PRINTK("scsi%d: performing request sense\n", HOSTNO);
> + dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO);
>
> local_irq_save(flags);
> LIST(cmd,hostdata->issue_queue);
> SET_NEXT(cmd, hostdata->issue_queue);
> hostdata->issue_queue = (Scsi_Cmnd *) cmd;
> local_irq_restore(flags);
> - QU_PRINTK("scsi%d: REQUEST SENSE added to head of "
> + dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
> "issue queue\n", H_NO(cmd));
> } else
> #endif /* def AUTOSENSE */
> @@ -2277,7 +2277,7 @@ static void NCR5380_information_transfer
> cmd->device->tagged_supported = 0;
> hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
> cmd->tag = TAG_NONE;
> - TAG_PRINTK("scsi%d: target %d lun %d rejected "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d rejected "
> "QUEUE_TAG message; tagged queuing "
> "disabled\n",
> HOSTNO, cmd->device->id, cmd->device->lun);
> @@ -2294,7 +2294,7 @@ static void NCR5380_information_transfer
> hostdata->connected = NULL;
> hostdata->disconnected_queue = cmd;
> local_irq_restore(flags);
> - QU_PRINTK("scsi%d: command for target %d lun %d was "
> + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %d was "
> "moved from connected to the "
> "disconnected_queue\n", HOSTNO,
> cmd->device->id, cmd->device->lun);
> @@ -2344,13 +2344,13 @@ static void NCR5380_information_transfer
> /* Accept first byte by clearing ACK */
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
> - EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO);
> + dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
>
> len = 2;
> data = extended_msg + 1;
> phase = PHASE_MSGIN;
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO,
> + dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
> (int)extended_msg[1], (int)extended_msg[2]);
>
> if (!len && extended_msg[1] <=
> @@ -2362,7 +2362,7 @@ static void NCR5380_information_transfer
> phase = PHASE_MSGIN;
>
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - EXT_PRINTK("scsi%d: message received, residual %d\n",
> + dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
> HOSTNO, len);
>
> switch (extended_msg[2]) {
> @@ -2493,7 +2493,7 @@ static void NCR5380_reselect(struct Scsi
>
> target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
>
> - RSL_PRINTK("scsi%d: reselect\n", HOSTNO);
> + dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
>
> /*
> * At this point, we have detected that our SCSI ID is on the bus,
> @@ -2544,7 +2544,7 @@ static void NCR5380_reselect(struct Scsi
> if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
> msg[1] == SIMPLE_QUEUE_TAG)
> tag = msg[2];
> - TAG_PRINTK("scsi%d: target mask %02x, lun %d sent tag %d at "
> + dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
> "reselection\n", HOSTNO, target_mask, lun, tag);
> }
> #endif
> @@ -2598,7 +2598,7 @@ static void NCR5380_reselect(struct Scsi
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
> hostdata->connected = tmp;
> - RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
> + dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
> HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
> falcon_dont_release--;
> }
> @@ -2640,7 +2640,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
> printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
> HOSTNO);
>
> - ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
> + dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
> NCR5380_read(BUS_AND_STATUS_REG),
> NCR5380_read(STATUS_REG));
>
> @@ -2653,7 +2653,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
>
> if (hostdata->connected == cmd) {
>
> - ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
> /*
> * We should perform BSY checking, and make sure we haven't slipped
> * into BUS FREE.
> @@ -2705,7 +2705,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
> SET_NEXT(tmp, NULL);
> tmp->result = DID_ABORT << 16;
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: abort removed command from issue queue.\n",
> + dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
> HOSTNO);
> /* Tagged queuing note: no tag to free here, hasn't been assigned
> * yet... */
> @@ -2728,7 +2728,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
>
> if (hostdata->connected) {
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
> return SCSI_ABORT_SNOOZE;
> }
>
> @@ -2761,12 +2761,12 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
> tmp = NEXT(tmp)) {
> if (cmd == tmp) {
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
>
> if (NCR5380_select(instance, cmd, (int)cmd->tag))
> return SCSI_ABORT_BUSY;
>
> - ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
>
> do_abort(instance);
>
> @@ -2890,7 +2890,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *
> */
>
> if ((cmd = connected)) {
> - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
> cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
> cmd->scsi_done(cmd);
> }
> @@ -2902,7 +2902,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *
> cmd->scsi_done(cmd);
> }
> if (i > 0)
> - ABRT_PRINTK("scsi: reset aborted %d disconnected command(s)\n", i);
> + dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i);
>
> /* The Falcon lock should be released after a reset...
> */
> @@ -2942,11 +2942,11 @@ static int NCR5380_bus_reset(Scsi_Cmnd *
> */
>
> if (hostdata->issue_queue)
> - ABRT_PRINTK("scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
> if (hostdata->connected)
> - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
> if (hostdata->disconnected_queue)
> - ABRT_PRINTK("scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
>
> local_irq_save(flags);
> hostdata->issue_queue = NULL;
> Index: linux-m68k/drivers/scsi/atari_scsi.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/atari_scsi.c 2014-03-19 23:23:02.000000000 +1100
> +++ linux-m68k/drivers/scsi/atari_scsi.c 2014-03-19 23:34:44.000000000 +1100
> @@ -313,7 +313,7 @@ static irqreturn_t scsi_tt_intr(int irq,
>
> dma_stat = tt_scsi_dma.dma_ctrl;
>
> - INT_PRINTK("scsi%d: NCR5380 interrupt, DMA status = %02x\n",
> + dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
> atari_scsi_host->host_no, dma_stat & 0xff);
>
> /* Look if it was the DMA that has interrupted: First possibility
> @@ -339,7 +339,7 @@ static irqreturn_t scsi_tt_intr(int irq,
> if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
> atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
>
> - DMA_PRINTK("SCSI DMA: There are %ld residual bytes.\n",
> + dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
> atari_dma_residual);
>
> if ((signed int)atari_dma_residual < 0)
> @@ -370,7 +370,7 @@ static irqreturn_t scsi_tt_intr(int irq,
> * other command. These shouldn't disconnect anyway.
> */
> if (atari_dma_residual & 0x1ff) {
> - DMA_PRINTK("SCSI DMA: DMA bug corrected, "
> + dprintk(NDEBUG_DMA, "SCSI DMA: DMA bug corrected, "
> "difference %ld bytes\n",
> 512 - (atari_dma_residual & 0x1ff));
> atari_dma_residual = (atari_dma_residual + 511) & ~0x1ff;
> @@ -437,7 +437,7 @@ static irqreturn_t scsi_falcon_intr(int
> "ST-DMA fifo\n", transferred & 15);
>
> atari_dma_residual = HOSTDATA_DMALEN - transferred;
> - DMA_PRINTK("SCSI DMA: There are %ld residual bytes.\n",
> + dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
> atari_dma_residual);
> } else
> atari_dma_residual = 0;
> @@ -473,11 +473,11 @@ static void atari_scsi_fetch_restbytes(v
> /* there are 'nr' bytes left for the last long address
> before the DMA pointer */
> phys_dst ^= nr;
> - DMA_PRINTK("SCSI DMA: there are %d rest bytes for phys addr 0x%08lx",
> + dprintk(NDEBUG_DMA, "SCSI DMA: there are %d rest bytes for phys addr 0x%08lx",
> nr, phys_dst);
> /* The content of the DMA pointer is a physical address! */
> dst = phys_to_virt(phys_dst);
> - DMA_PRINTK(" = virt addr %p\n", dst);
> + dprintk(NDEBUG_DMA, " = virt addr %p\n", dst);
> for (src = (char *)&tt_scsi_dma.dma_restdata; nr != 0; --nr)
> *dst++ = *src++;
> }
> @@ -877,7 +877,7 @@ static unsigned long atari_scsi_dma_setu
> {
> unsigned long addr = virt_to_phys(data);
>
> - DMA_PRINTK("scsi%d: setting up dma, data = %p, phys = %lx, count = %ld, "
> + dprintk(NDEBUG_DMA, "scsi%d: setting up dma, data = %p, phys = %lx, count = %ld, "
> "dir = %d\n", instance->host_no, data, addr, count, dir);
>
> if (!IS_A_TT() && !STRAM_ADDR(addr)) {
> @@ -1057,7 +1057,7 @@ static unsigned long atari_dma_xfer_len(
> possible_len = limit;
>
> if (possible_len != wanted_len)
> - DMA_PRINTK("Sorry, must cut DMA transfer size to %ld bytes "
> + dprintk(NDEBUG_DMA, "Sorry, must cut DMA transfer size to %ld bytes "
> "instead of %ld\n", possible_len, wanted_len);
>
> return possible_len;
> Index: linux-m68k/drivers/scsi/sun3_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> +++ linux-m68k/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:44.000000000 +1100
> @@ -364,7 +364,7 @@ static int is_lun_busy(struct scsi_cmnd
> return( 0 );
> if (TagAlloc[cmd->device->id][cmd->device->lun].nr_allocated >=
> TagAlloc[cmd->device->id][cmd->device->lun].queue_size ) {
> - TAG_PRINTK( "scsi%d: target %d lun %d: no free tags\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
> H_NO(cmd), cmd->device->id, cmd->device->lun );
> return( 1 );
> }
> @@ -388,7 +388,7 @@ static void cmd_get_tag(struct scsi_cmnd
> !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
> cmd->tag = TAG_NONE;
> hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
> - TAG_PRINTK( "scsi%d: target %d lun %d now allocated by untagged "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
> "command\n", H_NO(cmd), cmd->device->id, cmd->device->lun );
> }
> else {
> @@ -397,7 +397,7 @@ static void cmd_get_tag(struct scsi_cmnd
> cmd->tag = find_first_zero_bit( &ta->allocated, MAX_TAGS );
> set_bit( cmd->tag, &ta->allocated );
> ta->nr_allocated++;
> - TAG_PRINTK( "scsi%d: using tag %d for target %d lun %d "
> + dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d "
> "(now %d tags in use)\n",
> H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun,
> ta->nr_allocated );
> @@ -415,7 +415,7 @@ static void cmd_free_tag(struct scsi_cmn
>
> if (cmd->tag == TAG_NONE) {
> hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
> - TAG_PRINTK( "scsi%d: target %d lun %d untagged cmd finished\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n",
> H_NO(cmd), cmd->device->id, cmd->device->lun );
> }
> else if (cmd->tag >= MAX_TAGS) {
> @@ -426,7 +426,7 @@ static void cmd_free_tag(struct scsi_cmn
> TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
> clear_bit( cmd->tag, &ta->allocated );
> ta->nr_allocated--;
> - TAG_PRINTK( "scsi%d: freed tag %d for target %d lun %d\n",
> + dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
> H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun );
> }
> }
> @@ -618,7 +618,7 @@ static inline void NCR5380_all_init (voi
> {
> static int done = 0;
> if (!done) {
> - INI_PRINTK("scsi : NCR5380_all_init()\n");
> + dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n");
> done = 1;
> }
> }
> @@ -928,7 +928,7 @@ static int NCR5380_queue_command_lck(str
>
> local_irq_restore(flags);
>
> - QU_PRINTK("scsi%d: command added to %s of queue\n", H_NO(cmd),
> + dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
> (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
>
> /* If queue_command() is called from an interrupt (real one or bottom
> @@ -998,7 +998,7 @@ static void NCR5380_main (struct work_st
> done = 1;
>
> if (!hostdata->connected) {
> - MAIN_PRINTK( "scsi%d: not connected\n", HOSTNO );
> + dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO );
> /*
> * Search through the issue_queue for a command destined
> * for a target that's not busy.
> @@ -1043,7 +1043,7 @@ static void NCR5380_main (struct work_st
> * On failure, we must add the command back to the
> * issue queue so we can keep trying.
> */
> - MAIN_PRINTK("scsi%d: main(): command for target %d "
> + dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d "
> "lun %d removed from issue_queue\n",
> HOSTNO, tmp->device->id, tmp->device->lun);
> /*
> @@ -1072,7 +1072,7 @@ static void NCR5380_main (struct work_st
> cmd_free_tag( tmp );
> #endif
> local_irq_restore(flags);
> - MAIN_PRINTK("scsi%d: main(): select() failed, "
> + dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
> "returned to issue_queue\n", HOSTNO);
> if (hostdata->connected)
> break;
> @@ -1086,10 +1086,10 @@ static void NCR5380_main (struct work_st
> #endif
> ) {
> local_irq_restore(flags);
> - MAIN_PRINTK("scsi%d: main: performing information transfer\n",
> + dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
> HOSTNO);
> NCR5380_information_transfer(instance);
> - MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO);
> + dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
> done = 0;
> }
> } while (!done);
> @@ -1126,7 +1126,7 @@ static void NCR5380_dma_complete( struct
> return;
> }
>
> - DMA_PRINTK("scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
> + dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
> HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
> NCR5380_read(STATUS_REG));
>
> @@ -1185,27 +1185,27 @@ static irqreturn_t NCR5380_intr (int irq
> int done = 1, handled = 0;
> unsigned char basr;
>
> - INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO);
>
> /* Look for pending interrupts */
> basr = NCR5380_read(BUS_AND_STATUS_REG);
> - INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> + dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> // ENABLE_IRQ();
> - INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
> NCR5380_reselect(instance);
> (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> }
> else if (basr & BASR_PARITY_ERROR) {
> - INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO);
> (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> }
> else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
> - INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO);
> (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> }
> else {
> @@ -1225,7 +1225,7 @@ static irqreturn_t NCR5380_intr (int irq
> ((basr & BASR_END_DMA_TRANSFER) ||
> !(basr & BASR_PHASE_MATCH))) {
>
> - INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
> NCR5380_dma_complete( instance );
> done = 0;
> // ENABLE_IRQ();
> @@ -1234,7 +1234,7 @@ static irqreturn_t NCR5380_intr (int irq
> {
> /* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
> if (basr & BASR_PHASE_MATCH)
> - INT_PRINTK("scsi%d: unknown interrupt, "
> + dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
> "BASR 0x%x, MR 0x%x, SR 0x%x\n",
> HOSTNO, basr, NCR5380_read(MODE_REG),
> NCR5380_read(STATUS_REG));
> @@ -1258,7 +1258,7 @@ static irqreturn_t NCR5380_intr (int irq
> }
>
> if (!done) {
> - INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO);
> + dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
> /* Put a call to NCR5380_main() on the queue... */
> queue_main();
> }
> @@ -1335,7 +1335,7 @@ static int NCR5380_select(struct Scsi_Ho
>
> hostdata->restart_select = 0;
> NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> - ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> /*
> @@ -1381,7 +1381,7 @@ static int NCR5380_select(struct Scsi_Ho
> && !hostdata->connected);
> #endif
>
> - ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO);
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
>
> if (hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> @@ -1402,7 +1402,7 @@ static int NCR5380_select(struct Scsi_Ho
> (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
> hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> - ARB_PRINTK("scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
> HOSTNO);
> return -1;
> }
> @@ -1417,7 +1417,7 @@ static int NCR5380_select(struct Scsi_Ho
> hostdata->connected) {
> NCR5380_write(MODE_REG, MR_BASE);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> - ARB_PRINTK("scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
> HOSTNO);
> return -1;
> }
> @@ -1440,7 +1440,7 @@ static int NCR5380_select(struct Scsi_Ho
> return -1;
> }
>
> - ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO);
> + dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
>
> /*
> * Now that we have won arbitration, start Selection process, asserting
> @@ -1500,7 +1500,7 @@ static int NCR5380_select(struct Scsi_Ho
>
> udelay(1);
>
> - SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
> + dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
>
> /*
> * The SCSI specification calls for a 250 ms timeout for the actual
> @@ -1568,7 +1568,7 @@ static int NCR5380_select(struct Scsi_Ho
> #endif
> cmd->scsi_done(cmd);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> - SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO);
> + dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return 0;
> }
> @@ -1593,7 +1593,7 @@ static int NCR5380_select(struct Scsi_Ho
> /* Wait for start of REQ/ACK handshake */
> while (!(NCR5380_read(STATUS_REG) & SR_REQ));
>
> - SEL_PRINTK("scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
> + dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
> HOSTNO, cmd->device->id);
> tmp[0] = IDENTIFY(1, cmd->device->lun);
>
> @@ -1613,7 +1613,7 @@ static int NCR5380_select(struct Scsi_Ho
> data = tmp;
> phase = PHASE_MSGOUT;
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO);
> + dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
> /* XXX need to handle errors here */
> hostdata->connected = cmd;
> #ifndef SUPPORT_TAGS
> @@ -1676,11 +1676,11 @@ static int NCR5380_transfer_pio( struct
> */
> while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ));
>
> - HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO);
> + dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
>
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> - PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> + dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
> NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
> @@ -1721,7 +1721,7 @@ static int NCR5380_transfer_pio( struct
>
> while (NCR5380_read(STATUS_REG) & SR_REQ);
>
> - HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO);
> + dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
>
> /*
> * We have several special cases to consider during REQ/ACK handshaking :
> @@ -1742,7 +1742,7 @@ static int NCR5380_transfer_pio( struct
> }
> } while (--c);
>
> - PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c);
> + dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
>
> *count = c;
> *data = d;
> @@ -1850,7 +1850,7 @@ static int NCR5380_transfer_dma( struct
> }
> hostdata->dma_len = c;
>
> - DMA_PRINTK("scsi%d: initializing DMA for %s, %d bytes %s %p\n",
> + dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
> HOSTNO, (p & SR_IO) ? "reading" : "writing",
> c, (p & SR_IO) ? "to" : "from", *data);
>
> @@ -1992,7 +1992,7 @@ static void NCR5380_information_transfer
> --cmd->SCp.buffers_residual;
> cmd->SCp.this_residual = cmd->SCp.buffer->length;
> cmd->SCp.ptr = SGADDR(cmd->SCp.buffer);
> - INF_PRINTK("scsi%d: %d bytes and %d buffers left\n",
> + dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
> HOSTNO, cmd->SCp.this_residual,
> cmd->SCp.buffers_residual);
> }
> @@ -2084,7 +2084,7 @@ static void NCR5380_information_transfer
> /* Accept message by clearing ACK */
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
> - LNK_PRINTK("scsi%d: target %d lun %d linked command "
> + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked command "
> "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
>
> /* Enable reselect interrupts */
> @@ -2109,7 +2109,7 @@ static void NCR5380_information_transfer
> * and don't free it! */
> cmd->next_link->tag = cmd->tag;
> cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
> - LNK_PRINTK("scsi%d: target %d lun %d linked request "
> + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked request "
> "done, calling scsi_done().\n",
> HOSTNO, cmd->device->id, cmd->device->lun);
> #ifdef NCR5380_STATS
> @@ -2124,7 +2124,7 @@ static void NCR5380_information_transfer
> /* Accept message by clearing ACK */
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> hostdata->connected = NULL;
> - QU_PRINTK("scsi%d: command for target %d, lun %d "
> + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %d "
> "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
> #ifdef SUPPORT_TAGS
> cmd_free_tag( cmd );
> @@ -2138,7 +2138,7 @@ static void NCR5380_information_transfer
> /* ++Andreas: the mid level code knows about
> QUEUE_FULL now. */
> TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
> - TAG_PRINTK("scsi%d: target %d lun %d returned "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d returned "
> "QUEUE_FULL after %d commands\n",
> HOSTNO, cmd->device->id, cmd->device->lun,
> ta->nr_allocated);
> @@ -2182,7 +2182,7 @@ static void NCR5380_information_transfer
> if ((cmd->cmnd[0] != REQUEST_SENSE) &&
> (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
> scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
> - ASEN_PRINTK("scsi%d: performing request sense\n",
> + dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n",
> HOSTNO);
> /* this is initialized from initialize_SCp
> cmd->SCp.buffer = NULL;
> @@ -2194,7 +2194,7 @@ static void NCR5380_information_transfer
> SET_NEXT(cmd, hostdata->issue_queue);
> hostdata->issue_queue = (struct scsi_cmnd *) cmd;
> local_irq_restore(flags);
> - QU_PRINTK("scsi%d: REQUEST SENSE added to head of "
> + dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
> "issue queue\n", H_NO(cmd));
> } else
> #endif /* def AUTOSENSE */
> @@ -2234,7 +2234,7 @@ static void NCR5380_information_transfer
> cmd->device->tagged_supported = 0;
> hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
> cmd->tag = TAG_NONE;
> - TAG_PRINTK("scsi%d: target %d lun %d rejected "
> + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d rejected "
> "QUEUE_TAG message; tagged queuing "
> "disabled\n",
> HOSTNO, cmd->device->id, cmd->device->lun);
> @@ -2251,7 +2251,7 @@ static void NCR5380_information_transfer
> hostdata->connected = NULL;
> hostdata->disconnected_queue = cmd;
> local_irq_restore(flags);
> - QU_PRINTK("scsi%d: command for target %d lun %d was "
> + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %d was "
> "moved from connected to the "
> "disconnected_queue\n", HOSTNO,
> cmd->device->id, cmd->device->lun);
> @@ -2304,13 +2304,13 @@ static void NCR5380_information_transfer
> /* Accept first byte by clearing ACK */
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
> - EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO);
> + dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
>
> len = 2;
> data = extended_msg + 1;
> phase = PHASE_MSGIN;
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO,
> + dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
> (int)extended_msg[1], (int)extended_msg[2]);
>
> if (!len && extended_msg[1] <=
> @@ -2322,7 +2322,7 @@ static void NCR5380_information_transfer
> phase = PHASE_MSGIN;
>
> NCR5380_transfer_pio(instance, &phase, &len, &data);
> - EXT_PRINTK("scsi%d: message received, residual %d\n",
> + dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
> HOSTNO, len);
>
> switch (extended_msg[2]) {
> @@ -2454,7 +2454,7 @@ static void NCR5380_reselect (struct Scs
>
> target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
>
> - RSL_PRINTK("scsi%d: reselect\n", HOSTNO);
> + dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
>
> /*
> * At this point, we have detected that our SCSI ID is on the bus,
> @@ -2576,13 +2576,13 @@ static void NCR5380_reselect (struct Scs
> if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
> msg[1] == SIMPLE_QUEUE_TAG)
> tag = msg[2];
> - TAG_PRINTK("scsi%d: target mask %02x, lun %d sent tag %d at "
> + dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
> "reselection\n", HOSTNO, target_mask, lun, tag);
> }
> #endif
>
> hostdata->connected = tmp;
> - RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
> + dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
> HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
> }
>
> @@ -2618,7 +2618,7 @@ static int NCR5380_abort(struct scsi_cmn
>
> local_irq_save(flags);
>
> - ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
> + dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
> NCR5380_read(BUS_AND_STATUS_REG),
> NCR5380_read(STATUS_REG));
>
> @@ -2631,7 +2631,7 @@ static int NCR5380_abort(struct scsi_cmn
>
> if (hostdata->connected == cmd) {
>
> - ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
> /*
> * We should perform BSY checking, and make sure we haven't slipped
> * into BUS FREE.
> @@ -2682,7 +2682,7 @@ static int NCR5380_abort(struct scsi_cmn
> SET_NEXT(tmp, NULL);
> tmp->result = DID_ABORT << 16;
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: abort removed command from issue queue.\n",
> + dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
> HOSTNO);
> /* Tagged queuing note: no tag to free here, hasn't been assigned
> * yet... */
> @@ -2703,7 +2703,7 @@ static int NCR5380_abort(struct scsi_cmn
>
> if (hostdata->connected) {
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
> return SCSI_ABORT_SNOOZE;
> }
>
> @@ -2736,12 +2736,12 @@ static int NCR5380_abort(struct scsi_cmn
> tmp = NEXT(tmp))
> if (cmd == tmp) {
> local_irq_restore(flags);
> - ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
>
> if (NCR5380_select (instance, cmd, (int) cmd->tag))
> return SCSI_ABORT_BUSY;
>
> - ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
> + dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
>
> do_abort (instance);
>
> @@ -2853,7 +2853,7 @@ static int NCR5380_bus_reset(struct scsi
> */
>
> if ((cmd = connected)) {
> - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
> cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
> cmd->scsi_done( cmd );
> }
> @@ -2865,7 +2865,7 @@ static int NCR5380_bus_reset(struct scsi
> cmd->scsi_done( cmd );
> }
> if (i > 0)
> - ABRT_PRINTK("scsi: reset aborted %d disconnected command(s)\n", i);
> + dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i);
>
>
> /* since all commands have been explicitly terminated, we need to tell
> @@ -2899,11 +2899,11 @@ static int NCR5380_bus_reset(struct scsi
> */
>
> if (hostdata->issue_queue)
> - ABRT_PRINTK("scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
> if (hostdata->connected)
> - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
> if (hostdata->disconnected_queue)
> - ABRT_PRINTK("scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
> + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
>
> local_irq_save(flags);
> hostdata->issue_queue = NULL;
>



\
 
 \ /
  Last update: 2014-04-26 04:01    [W:0.387 / U:2.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site