lkml.org 
[lkml]   [2014]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: phy: msm: Select secondary PHY via TCSR
Hi,

On Fri, Apr 04, 2014 at 03:18:11PM -0700, Tim Bird wrote:
> Select the secondary PHY using the TCSR register, if phy-num=1
> in the DTS (or phy_number is set in the platform data). The
> SOC has 2 PHYs which can be used with the OTG port, and this
> code allows configuring the correct one.
>
> Note: This resolves the problem I was seeing where I couldn't
> get the USB driver working at all on a dragonboard, from cold
> boot. This patch depends on patch 5/14 from Ivan's msm USB
> patch set. It does not use DT for the register address, as
> there's no evidence that this address changes between SoC
> versions.
>
> Signed-off-by: Tim Bird <tim.bird@sonymobile.com>

doesn't apply:

checking file drivers/usb/phy/phy-msm-usb.c
Hunk #1 succeeded at 1412 with fuzz 2 (offset -106 lines).
Hunk #2 FAILED at 1581.
1 out of 2 hunks FAILED
checking file include/linux/usb/msm_hsusb_hw.h

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-04-21 18:41    [W:0.041 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site