lkml.org 
[lkml]   [2014]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/8] Reorder i.MX IPU display enable/disable sequence
On Mon, Apr 14, 2014 at 11:53:15PM +0200, Philipp Zabel wrote:
> Repeatedly enabling and disabling the display currently can lead to a state
> in which the IPU doesn't produce a valid signal anymore because we disable
> IPU submodules before they can finish their interaction.
>
> This series reorders the enable/disable sequence so that we first wait for the
> DC/DP to finish processing the current frame, then stop the DI and IDMAC, and
> only then disable clocks to the submodules. Also from now on we really disable
> the DC when it is not in use.

Okay, I'm going to queue these up in a couple of days, but there's
something which I'd prefer to be fixed... there's one in particular
that is excessively long.

> Philipp Zabel (8):
> imx-drm: ipu-common: add ipu_map_irq to request non-IDMAC interrupts
> imx-drm: ipu-common: Add helpers to check for a busy IDMAC channel and
> to busywait for an interrupt
> imx-drm: ipu-dmfc: Wait for FIFOs to run empty before disabling
> imx-drm: ipu-dc: Wait for DC_FC_1 / DP_SF_END interrupt
> imx-drm: ipu-dp: Split disabling the DP foreground channel from
> disabling the DP module
> imx-drm: imx-dp: When disabling the DP foreground channel, wait until
> the DP background channel is finished before disabling the IDMAC
> channel

imx-drm: imx-dp: disable DP fg channel after DP bg channel has finished

maybe?

> imx-drm: ipuv3-crtc: Change display enable/disable order
> imx-drm: ipu-dc: Disable DC module when not in use


--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.


\
 
 \ /
  Last update: 2014-04-18 12:21    [W:0.079 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site