lkml.org 
[lkml]   [2014]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] mmc: sdhci: add a driver for Berlin SoCs
On 04/16/2014 02:40 PM, Antoine Ténart wrote:
> Add a Driver to support the SDHCI controller of the Marvell Berlin SoCs.
> This controller supports 3 sockets.

nit: Isn't it three controller with one socket each?

> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
> ---
> drivers/mmc/host/Kconfig | 11 ++++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-berlin.c | 129 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 141 insertions(+)
> create mode 100644 drivers/mmc/host/sdhci-berlin.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 1384f67abe21..42db70031eb2 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -283,6 +283,17 @@ config MMC_SDHCI_BCM2835
>
> If unsure, say N.
>
> +config MMC_SDHCI_BERLIN
> + tristate "Marvell Berlin SD/MMC Host Controller support"
> + depends on ARCH_BERLIN
> + depends on MMC_SDHCI_PLTFM
> + select MMC_SDHCI_IO_ACCESSORS
> + help
> + This selects the Berlin SD/MMC controller. If you have a Berlin
> + platform with SD or MMC devices, say Y or M here.
> +
> + If unsure, say N.
> +
> config MMC_OMAP
> tristate "TI OMAP Multimedia Card Interface support"
> depends on ARCH_OMAP
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 3483b6b6b880..b0256290530c 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
> obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
> obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
> obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
> +obj-$(CONFIG_MMC_SDHCI_BERLIN) += sdhci-berlin.o
>
> ifeq ($(CONFIG_CB710_DEBUG),y)
> CFLAGS-cb710-mmc += -DDEBUG
> diff --git a/drivers/mmc/host/sdhci-berlin.c b/drivers/mmc/host/sdhci-berlin.c
> new file mode 100644
> index 000000000000..ece8f7863937
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-berlin.c
> @@ -0,0 +1,129 @@
> +/*
> + * Marvell Berlin SDHCI driver
> + *
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Ténart <antoine.tenart@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/mmc/host.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +#include "sdhci-pltfm.h"
> +
> +static struct sdhci_ops sdhci_berlin_ops = {
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> +};
> +
> +static struct sdhci_pltfm_data sdhci_berlin2_pdata = {
> + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
> + SDHCI_QUIRK_BROKEN_ADMA |
> + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
> + .ops = &sdhci_berlin_ops,
> +};
> +
> +static struct sdhci_pltfm_data sdhci_berlin2q_pdata = {
> + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
> + SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
> + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
> + .ops = &sdhci_berlin_ops,
> +};
> +
> +static const struct of_device_id sdhci_berlin_of_match_table[] = {
> + {
> + .compatible = "marvell,berlin2-sdhci",
> + .data = &sdhci_berlin2_pdata,
> + },
> + {
> + .compatible = "marvell,berlin2cd-sdhci",
> + .data = &sdhci_berlin2_pdata,
> + },
> + {
> + .compatible = "marvell,berlin2q-sdhci",
> + .data = &sdhci_berlin2q_pdata,
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_berlin_of_match_table);
> +
> +static int sdhci_berlin_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct sdhci_host *host;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct clk *clk;
> + const struct of_device_id *device =
> + of_match_device(sdhci_berlin_of_match_table, dev);
> + int ret;
> +
> + host = sdhci_pltfm_init(pdev,
> + (struct sdhci_pltfm_data *)device->data, 0);
> + if (IS_ERR(host))
> + return PTR_ERR(host);
> +
> + pltfm_host = sdhci_priv(host);
> +
> + clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(clk)) {
> + dev_err(dev, "could not get clock: %ld\n", PTR_ERR(clk));
> + ret = PTR_ERR(clk);
> + goto err_clk_get;
> + }
> +
> + clk_prepare_enable(clk);
> + pltfm_host->clk = clk;
> +
> + sdhci_get_of_property(pdev);
> +
> + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> + host->mmc->caps |= MMC_CAP_NONREMOVABLE;

Documentation/devicetree/bindings/mmc/mmc.txt names "non-removable"
as a standard property. Any chance we can shove this two lines above
right into sdhci_get_of_property()?

Besides the other comments from Joe, this looks good to me,

Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

> +
> + ret = sdhci_add_host(host);
> + if (ret)
> + goto err_add_host;
> +
> + return 0;
> +
> +err_add_host:
> + clk_disable_unprepare(pltfm_host->clk);
> +err_clk_get:
> + sdhci_pltfm_free(pdev);
> +
> + return ret;
> +}
> +
> +static int sdhci_berlin_remove(struct platform_device *pdev)
> +{
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + sdhci_pltfm_unregister(pdev);
> + clk_disable_unprepare(pltfm_host->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver sdhci_berlin_driver = {
> + .driver = {
> + .name = "berlin-sdhci",
> + .owner = THIS_MODULE,
> + .pm = SDHCI_PLTFM_PMOPS,
> + .of_match_table = sdhci_berlin_of_match_table,
> + },
> + .probe = sdhci_berlin_probe,
> + .remove = sdhci_berlin_remove,
> +};
> +module_platform_driver(sdhci_berlin_driver);
> +
> +MODULE_DESCRIPTION("SDHCI driver for Marvell Berlin SoC");
> +MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
> +MODULE_LICENSE("GPL");
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-04-16 16:41    [W:0.098 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site