lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 11/11] backlight: pwm_bl: retrieve configured pwm period
Date
The PWM core is now able to initialize the PWM period from platform_data. Use it
and if it is not configured, use the supplied pwm_period_ns.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/video/backlight/pwm_bl.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index b75201ff46f6..1bb8a69062c5 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -304,12 +304,14 @@ static int pwm_backlight_probe(struct platform_device *pdev)
/*
* The DT case will set the pwm_period_ns field to 0 and store the
* period, parsed from the DT, in the PWM device. For the non-DT case,
- * set the period from platform data.
+ * set the period from platform data if it is not already set.
*/
- if (data->pwm_period_ns > 0)
+ pb->period = pwm_get_period(pb->pwm);
+ if (!pb->period && (data->pwm_period_ns > 0)) {
+ pb->period = data->pwm_period_ns;
pwm_set_period(pb->pwm, data->pwm_period_ns);
+ }

- pb->period = pwm_get_period(pb->pwm);
pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale);

memset(&props, 0, sizeof(struct backlight_properties));
--
1.8.3.2


\
 
 \ /
  Last update: 2014-04-15 00:41    [W:0.094 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site