lkml.org 
[lkml]   [2014]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] p54usb: fix leaks at failure path in p54u_probe()
Date
On Sunday, March 09, 2014 04:14:32 AM Krishna Chaitanya wrote:
> On Sat, Mar 8, 2014 at 2:41 AM, Alexey Khoroshilov
> <khoroshilov@ispras.ru> wrote:
> > If p54u_load_firmware() fails, p54u_probe() does not deallocate
> > already allocated resources. The patch adds proper failure handling.
> >
> > Found by Linux Driver Verification project (linuxtesting.org).
> >
> > Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
> > ---
> > drivers/net/wireless/p54/p54usb.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
> > index 6e635cfa24c8..5df74503fd4f 100644
> > --- a/drivers/net/wireless/p54/p54usb.c
> > +++ b/drivers/net/wireless/p54/p54usb.c
> > @@ -1053,6 +1053,10 @@ static int p54u_probe(struct usb_interface *intf,
> > priv->upload_fw = p54u_upload_firmware_net2280;
> > }
> > err = p54u_load_firmware(dev, intf);
> > + if (err) {
> > + usb_put_dev(udev);
> > + p54_free_common(dev);
> > + }
> > return err;
> > }
> The load_firmware puts down the reference
> in case of error. Only free is required here.
No, the put is required too... But let me explain:

p54u_load_firmware calls usb_get_dev(udev) before it requests the firmware
load. The Reason is: the firmware callback is usually run in another thread
(usually it's pretty quick, but due to timeouts it could take up to 60 seconds
- or at least it did when I wrote it). Therefore I found it appropriate to give
that request callback its "reference++" as it needs the "udev" too (e.g.: for
dev_info, dev_err and releasing the driver if the device couldn't be
initialized).

Regards,
Christian


\
 
 \ /
  Last update: 2014-03-09 00:41    [W:0.142 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site