lkml.org 
[lkml]   [2014]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 2/2] xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
drivers/usb/host/xhci.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6fbba7a..dc7cfb5 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -292,7 +292,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
xhci->msix_entries[i].vector = 0;
}

- ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
+ ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count);
if (ret) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Failed to enable MSI-X");
--
1.7.7.6
--
Regards,
Alexander Gordeev
agordeev@redhat.com


\
 
 \ /
  Last update: 2014-03-07 09:21    [W:0.067 / U:2.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site